Customizing starts with the wheels.
0:32 - Thunderbike License Plate Lighting
0:40 - Thunderbike License Plate Frame Inside Plate
0:50 - Thunderbike Tele Fork Lowering Kit
1:00 - Thunderbike Spoke Wheel
1:40 - Thunderbike Front Axle Cover-Set
1:52 - Thunderbike Turn Signals Stripe LED with Housing
2:15 - Thunderbike Front Fender 21" Fiberglass
2:23 - Thunderbike Brake Disc Spoke Floated 340 mm
2:35 - Thunderbike Chin Fairing GP Style Long
2:52 - Thunderbike Forward Control Kit black
3:00 - Thunderbike Timer Cover New Custom
3:12 - Thunderbike Airbox Cover Oval Torque TB-Logo
3:35 - Thunderbike Tank Mount black
3:50 - Thunderbike Handlebar Atlas Wide 35 cm black
4:00 - Thunderbike Grips Base Satin black cut
4:12 - Thunderbike Rider Footpegs Base Alu Design
4:27 - Thunderbike Seat Plate
4:35 - Thunderbike Air Ride Suspension Kit
4:47 - Thunderbike Seat Foam for TB Seat Plate
5:03 - Thunderbike Rear Fender Steel 260 mm
5:12 - Thunderbike Passenger Footpegs Alu Design
5:23 - Thunderbike Single-Side Swingarm Kit 21" Alu
5:53 - Thunderbike Brake Caliper Adapter 300 to 340 mm, left black
6:03 - Thunderbike Pulley Spoke
6:15 - Thunderbike Shiftpeg & Brakepeg Alu
6:40 - Motogadget mo.view Sport 150 Mirror black
6:52 - Thunderbike Riser Kit Atlas 32 mm black
7:07 - Thunderbike Toppers Base
7:15 - Thunderbike Brake caliper cover
7:40 - Thunderbike Cover Tank to Seat, black
For us, customization starts with the wheels. But it doesn’t stop there. The components have to fit together, and so begins a process that branches out into the smallest details and ends with little covers that bear our name, like the ignition and clutch covers from our New Custom line. These are like the icing on the cake that will not melt away, and anyone who knows a little bit about Harley styling will see that the Silver Blast is not just equipped with small plates.
The name says it all. Silver Blast is an explosion of detailed solutions that had its big bang when the wheels were replaced. But it was also overdue. The 18-inch Lakester rims of the original Fat Boy are absolutely right when it comes to conveying its traditional name. But the Silver Blast was not meant to be a fat boy.
So go for it with our slim 21-inch spoke wheels! We supply them in bare metal, but our customer wanted them black. Well then, we can powder-coat them too. And that’s when things branch out into the details. In this large front wheel format, the original 300 millimeter discs would look all too tiny.
We have the 340 millimeter discs, and we have the adapters that allow the original brake calipers to remain on these discs. A front fender made of GRP fits closely to the front wheel. Lowering the fork neutralizes the change in caster caused by the larger front wheel.
The gap from the wheel to the engine is now closed by our GP Chin fairing. But our process really continues above the front end. We were able to incorporate our relatively new Atlas Wide handlebar into the design. It is 35 centimeters high and 85 centimeters wide. Most importantly, it is 45 millimeters thick. This is where the Fat Boy lives up to its name.
Pay special attention to the clean look of the handlebars: we have routed the cables, wires, brake line and an additional hydraulic clutch line inside. There is plenty of room inside the handlebars.
Our satin grips and Atlas risers fit flush with the thick format. Of course, the handlebars have the one-inch diameter at the ends of the grips that they must have to accommodate original Harley or aftermarket grips. You can barely see the stripe indicators mounted under the grips, and that’s the way it should be.
We also have a 21" rear wheel. So you don’t have to search for it, it rotates in our single-sided swingarm kit. The view from the right is completely unobstructed. We don’t have to be ashamed of the left side either. The rear wheel is slowed down by our huge perimeter brake and powered by our spoke pulley. Everything comes from the same line, the pulley and the wheel have the same number of rims – 15, please count them!
Customized THUNDERBIKE Harley-Davidson Softail FAT BOY 114
[ Ссылка ]
(Source: THUNDERBIKE, Harley-Davidson)
Thanks for watching!
#HarleyDavidsonCustom#FatBoySILVERBLAST#FATBOYCustom
![](https://i.ytimg.com/vi/uEo36fV-mIg/maxresdefault.jpg)