Creating DIY studio monitor speaker stands is a simple, easy, and cheap project for your home recording studio. Basic monitor stands can be customized to suit your needs, and assembled from dimensional lumber available at your local hardware store.

For my monitor stands, I used a single 8' piece of 1"x12", two 2"x6" boards, some 1 1/2" screws, and some black paint. The total cost comes to under $20 for all pieces.

For the bases of the speaker stands, I cut two 14" sections off of the 1" x 12" board. For the tops of the speaker stands, I cut two 11" pieces from the 1" x 12" board. For the legs, I used four 29" sections of the 2" x 6" boards.

Check out my blog for more details:
[ Ссылка ]


Connect Here:
[ Ссылка ]

[ Ссылка ]

свернуть