This is a quick guide to how to set up an oxy-acetylene cutting torch. you will have to set your gas pressure to something different based on the thickness of the steel your cutting. I ended up having my oxygen pressure at 12, and acetylene at 6. The steel I was cutting was 5/8" thick. And I had to move very slowly to get all the way through the steel.
If you have any confusion or questions, let me know in the comments.
How to set up a cutting torch? / Quick Guide!
Теги
oxy-acetylene cuttingoxy-acetylene weldinghow to set up oxygen acetylene torches for cuttingweldingcutting torchtorchquick guide to gas weldingcutting with oxy acetylenehow to cut with a gas torchhow to cut with oxygen acetyleneferrous phoenixtorch cutting guidefast tutorialdiy steel projectsdiydiy welding projectcutting torch valve settingswhy does my torch have 3 knobs5/8steelcutting