Here is a step-by-step process for making a face mold using plaster of Paris:
Gather Materials: You will need plaster of Paris, water, petroleum jelly, a mixing bowl, a whisk, a measuring cup, a plastic spoon, a container for molding, and a model or person's face to mold.
Prepare the Model: If you're using a person's face, make sure they tie their hair back and remove any jewelry. Apply a thin layer of petroleum jelly all over their face to protect their skin and hair from the plaster.
Mix Plaster: In a mixing bowl, measure out the plaster of Paris according to the instructions on the packaging. Then add water to the plaster slowly while stirring with a whisk until it reaches a thick, but pourable consistency.
Pour Plaster: Pour the plaster into the molding container. If you're molding someone's face, you can use a container that is wider than their face to create a border around it.
Press Model: Gently press the model's face into the plaster. Make sure the face is fully submerged in the plaster, but not too deep that it touches the bottom of the container. Hold the model in place for a few minutes until the plaster starts to set.
Let Dry: Allow the plaster to dry for at least 30 minutes or until it is completely dry and hard.
Remove Mold: Once the plaster is fully dry, carefully remove the mold from the container. Gently peel the mold away from the model's face or cut it with scissors if needed.
Finishing: Clean up any rough edges or excess plaster using sandpaper or a knife. Your face mold is now ready to use.
Remember to always follow safety precautions while working with plaster of Paris, such as wearing gloves and a mask, and working in a well-ventilated area.
#PlasterOfParisFaceMold
#plasterofparis
#moldmaking
Ещё видео!