I always make the Elevated Floor and Feed Hole Cover from expanded metal when building my hobo stoves. This time, I used the lid from the 1 gallon can and perforated it with 1/4" holes for the elevated floor. The feed hole and removable cover I changed into a much needed vent hole which isn't even going to need a removable cover. The 4" x 5" vent hole area should be perforated with 1/4' holes around the perimeter and 3/4" holes in the center. Once again, since these holes are drilled into the side of the can itself, no cover is required.
I wish that I had not been in such a hurry. There were some NASTY storm clouds approaching, quickly. I really messed up drilling the holes in the vent hole area. LOL! I ended up having to cut the entire area out and resort to my standard expanded metal cover again. So actually, I ended up with a hybrid. BUT, you get the idea. Make sure that you take your time and drill the holes more accurately.
Please follow the LINKs below and SUBSCRIBE. Thank You!

Hobo Stove Builds Playlist
[ Ссылка ]
Poor Man’s Hobo Stove Build, No Costs... No Power Tools
[ Ссылка ]

свернуть