Click for more info and reviews of this Durabilt E-Track:
[ Ссылка ]
Check out some similar E-Track options:
[ Ссылка ]
[ Ссылка ]
Don’t forget to subscribe!
[ Ссылка ]
Full transcript: [ Ссылка ]
Hi there. I'm Michael with etrailer.com. Today, we're going to take a quick look at this DuraBuilt wood beam socket. This socket is going to hook right into your E-Track anchor or rail, and it will secure a standard two by four in place so that you can easily have that two by four used as a beam. This does have a super easy setup. It's got a spring fitting that will allow you to easily attach this to your E-Track.
It does have a nice sturdy construction as well. And so it is going to give you a safe working load limit of 500 pounds as well as a maximum load or break strength of 1,500 pounds. For a few measurements here, this is going to be right about three and a half inches back for your two by four. It's going to stand up at about two and three quarters of an inch, and it is going to be right at approximately one and three quarters. So we'll be nice and snug for your two by fours.
So you're not going to have to worry about that moving around. But you can see, we do have several points where we could put screws through there to make sure that it's going to stay in place for us, so that everything is going to be nice and sturdy as we use that two by four as a beam. So that's going to complete our look for today. Again, I'm Michael with etrailer.com. Thanks for watching..
![](https://s2.save4k.ru/pic/uqSy7MRR9NM/maxresdefault.jpg)