Lention MacBook Screen Protector Installation Steps:
1. Aligning the screen protector against your MacBook screen perfectly, make sure to place the "Step 2" label facing upward.
2. Attach two dust stickers to the edge of the screen protector and firmly fix them to your MacBook on one side.
3. Lift the whole screen protector from the end opposite to the dust stickers.
4. Use the microfiber cloth to clean your laptop screen, and wipe off the residue with blue dust stickers from the top down.
5. Pull the "Step 1" tab to peel off the bottom protective layer until the adhesive side is partially exposed. Peel off about half of the film, not the whole.
6. Fold the protector back over the screen and slowly stick it on. If there are any air bubbles, push back, peel slightly, and gently press.
7. Peel off the two dust stickers on your laptop and pull the tab from "Step 2" until the top protective layer is completely peeled off.
8. Wrap the hard card with the microfiber cloth and slowly push out any remaining air bubbles created during installation.
9. Once finished and you still have dust left, extract any particles with a remove sticker and a dust-removing sticker.
If you have any questions, do not hesitate to contact us at support@lention.com
Ещё видео!