[ Ссылка ]
[ Ссылка ]
[ Ссылка ]
To disassemble and reassemble a Chinese SKS rifle, follow these key steps:
Clear the firearm: Ensure the rifle is unloaded and the magazine is removed. Safety should always be the top priority when handling firearms.
Removing the gas tube: Push the button located on the front of the gas tube and lift it upwards to detach it from the rifle's receiver.
Removing the bolt carrier group: Pull the charging handle back and lift it up to remove the bolt carrier group from the receiver.
Removing the trigger group: Push the takedown lever located at the rear of the trigger guard, then pivot the trigger group downwards and pull it out of the rifle.
Removing the stock: Unscrew the stock screws located at the bottom and rear of the receiver, and then lift the stock off the rifle.
Cleaning and maintenance: Clean each component thoroughly using appropriate cleaning tools and solvents. Inspect for any signs of wear or damage, and replace parts if necessary.
Reassembling the rifle: Reverse the steps above to put the rifle back together. Ensure all components are properly aligned and securely tightened.
Function check: After reassembly, perform a function check by ensuring the safety functions correctly, the trigger operates smoothly, and the bolt cycles properly.
Remember, it is important to have proper knowledge, experience, and caution when disassembling and reassembling firearms. Always refer to the manufacturer's manual or seek assistance from a qualified gunsmith if needed
restoration Gun , Restoration Video
#restoration #diy #gun #restore
