00:00 Intro
00:23 Deconstruction
01:00 Version One
01:40 3D CAD Model
02:43 Slicer Workflow
03:45 Ubiquitous Printing Shot
03:53 Assembly Process
This is a very simple low-level micro tripod, which I made to hold a mini projector. The original tripods was made from injection moulded plastic apart from the 1/4" threaded screw, and one of the legs broke off because the pivot mechanism was only a few mm thick. I decided to make a new one, using metal shelf pins to create the pivot for the legs. I CAD modelled the design and 3D Printed the parts with the first version only push fitting the two parts of the head sections together, thus popping apart when too much weight was added. The second version included through holes to secure parts together, but the legs were too short and projector became top heavy. I made subsequent versions with longer legs and protrusions on the legs to prevent them from being over extended when closed, which could damage the parts.
Website Article: [ Ссылка ]
Instagram: [ Ссылка ]
CNC Channel : [ Ссылка ]
DIY Mini Desktop Tripod - Project Mount / 3D Printed
Теги
TripodMicro TripodDIYDIY tripodMini TripodDesktop TripodHi-HatProjector Stand3D Printing3D PrintedDesignArtMakingProjectsCAD ModelCAD DesignFuctionalSpaceSatelliteσπιτικότρίποδο3D Εκτύπωσηfatti in casatreppiediStampa 3Dhecho en casatrípodeImpresión 3dfait maisontrépiedimpression en 3DhausgemachtStativ3d Druckencaseirotripéimpressao 3Dbuatan sendirikaki tigaPencetakan 3Dev yapımıüçayak3D Baskıstatief