This video is how to replace the strap of the original Dahon rear cargo rack bungee luggage strap. My original Dahon luggage strap lasted about 2 months before it lost it elasticity. The Dahon OEM strap costs about $12-$15 from Dahon or resellers. I never bought a new one and just tied it to my rack for over 12 years and just used grocery panniers ( [ Ссылка ] ) and bicycle trunks ( [ Ссылка ]) .

Btw, my Youtube vlogs and reviews may also have associated affiliate links to products that may earn from qualifying purchases.
For bicycle, folding bikes, travel and gift ideas, check out my Amazon list.
Visit: [ Ссылка ]

My 2008 and 2009 Dahon Speed D7, and Dahon Mariner D7 ( [ Ссылка ] ), are 20 inch wheel folding bikes that came with a rear carry rack and a unique Dahon bungee flat luggage strap with a rack specific anchors. I have bought generic flat bungee cords to replace old stretched straps ( [ Ссылка ] ) over the year, however didnt want the original anchors lost so I decided to replace the broken strap. You can use customize and personalize your own strap with your own color by replacing the strap. I saw HDX 48 inch flat bungee cords in green at Home Depot for under $3. It is too short for a 3 strap design of the original. Its enough to make a two strap version. For 3 strap design, you will need at least 72+ inches of flat bungee cord. If the new cord has ends you will need to remove or cut them off with a pair a scissors.

You need to remove the both Dahon strap anchor covers. Pull out the end of the bungee cord with the end clip. Use long nose pliers ( [ Ссылка ] ) to loosen the clip. You will need to reuse the clips. Run the new 48 inch through the two side holes on the original clip. If you have a 24 inch flat bungee cord you can alternatively make a 1 strap replacement through the center hole. If you can find a 72 in bungee cord you can string it like the original. You will need a large pair of pliers to clamp the clip back on the new bungee cord ends. I use a Channel Lock Groove Joint pliers ( [ Ссылка ] ) . make sure the length of the new cords are equal length. Replace the anchor covers. Test on your Dahon rack. Done!

Thank you for visiting and supporting SterlingW Youtube Channel!
Thanks for watching! Like, Subscribe, Leave a comment, and click the Bell button!
Visit: [ Ссылка ]

SOCIAL MEDIA:
Join me on Youtube: [ Ссылка ]
Instagram: [ Ссылка ]
Twitter: [ Ссылка ] ( @sterlingwong8 )
Website: [ Ссылка ]

Disclaimer:
This is what i do for entertainment and your viewing entertainment! Some of the stuff are entertaining, while some are just plain silly. If you do anything with your own property, you do so at your own risk.
Due to factors beyond the control of Sterlingwong, I cannot guarantee against improper use or unauthorized modifications of this information. This information is for entertainment only. Sterlingwong assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. Sterlingwong recommends safe practices when working on personal property , vehicles, and / or with tools seen or implied in this video. Due to factors beyond the control of Sterlingwong, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not Sterlingwong. 2

свернуть