Products link
Ortur Laser Master 3：[ Ссылка ]
-Can the Ortur Laser Master 3 truly engrave at speeds of 20,000mm/min?
Yes it can! And this was achieved by using 4 main changes in design
1.First of all, the OLM3 was redesigned to have its mechanical structure center of gravity as low as possible. Ultimately, there is a substantial reduction in the frame harmonic vibrations.
2.Secondly, the LU2-10A 10W laser module that powers the OLM3 is extremely light. Only 235 grams, maintaining high power delivery and cooling performance.
3.The OLM3 motherboard and firmware employs G-code streaming optimization, allowing the transfer of data to break the old limitations of 6000mm/min.
4.TMC2209 stepper driver chips are used on the OLM3. These high performing drivers allow for high torque, silent operation and no switching homing.
-What does 20,000mm/min speed engraving actually mean?
Ultimately it will save time. In combination with the 10w true optical power of the LU2-10, the Ortur Laser Master 3 can double the work output possible with a Laser Engraver. If you're using an laser engraver on a commercial say, you will be able to serve twice as many customers in the same amount of time. Time become actual Money!
As an example, it takes 30 minutes to engrave a black and white image of about 10CMx10CM at a speed of 6000mm/min. The same image engraved at max speed with the OLM3 can be finished in roughly 10 minutes.
Join our group: Join Sinis Facebook Group：
[ Ссылка ]...
[ Ссылка ]
Contact us: Have questions about your order? Please contact sales@sinismall.com
Need any support using Sinis machines? Please contact mavis@sinis.com
Join our affiliate: [ Ссылка ]... (commission rate up to 8%)
Are you an influencer? Do you want to review Sinis products?
Send emails to press@sinismall.com now!
