DIY SMALL CLOSET OR WARDROBE
The Closet was assembled thru the use of pocketholes and screw. It can easily disassemble, if you want to remove it or transfer it in the future.
Dimensions and measurements always depends on the space available in your bedroom. Although I added dimensions in the video, it is just for your reference only.
Materials needed on this project:
3/4 Plyboard ( 2 Plys )
1/4 plywood ( 1 Ply )
Black screw for wood ( 1.25” screw )
1” Finishing nails
Wood glue
Davies wood Primer paint ( 2 to 3 liters )
Davies Aqua Gloss-it white paint ( 2 liters )
Davies Aqua Gloss-it black paint ( 1 liter )
4” Paint Roller ( 2 pcs foam type )
1” Paint brush
1 Paint Tray
Bosny Putty
Sandpaper ( 2 pcs 220 grit and 2 pcs 150 grit )
Closet door handle ( 2 pcs 233mm gold color )
Drawer knob ( 6 pcs gold color )
Closet handle and knob is made of aluminum
Alloy
Concealed Hinge ( 6 pairs full overlay soft close )
14” Drawer Slides ( 3 fold type, 2 pairs )
Closet Rod Flange and Aluminum pipe ( 3/4”)
Shelf Pins
Pockethole Plugs
Dowel Stick
I also use lightings inside the closet which is run by batteries, but this is optional only, If you want to make it look classy.
I also use old 3/4 plyboards from the old closet. And 3/4 marine plywood from the remnants of my previous projects. This will help lessen the cost of materials.
If you have more queries. Please do not hesitate to ask me thru the comment section on my video. Although woodworking is not my field but any comments and suggestions is always welcome hence these will help to improve my projects in the future.
Thank you so much for watching.
SUBSCRIBE TO MY CHANNEL:
[ Ссылка ]
FOLLOW ME ON MY FACEBOOK ACCOUNT:
[ Ссылка ]
Ещё видео!