In this activity 11.1.10 Packet Tracer Implement Port Security, we will configure and verify port security on a switch. Port security allows you to restrict a port’s ingress traffic by limiting the MAC addresses that are allowed to send traffic into the port.

step 1: Configure Port Security
a. Access the command line for S1 and enable port security on Fast Ethernet ports 0/1 and 0/2.
Open Configuration Window
S1(config)# interface range f0/1 – 2
S1(config-if-range)# switchport port-security
b. Set the maximum so that only one device can access the Fast Ethernet ports 0/1 and 0/2.
S1(config-if-range)# switchport port-security maximum 1
c. Secure the ports so that the MAC address of a device is dynamically learned and added to the running configuration.
S1(config-if-range)# switchport port-security mac-address sticky
d. Set the violation mode so that the Fast Ethernet ports 0/1 and 0/2 are not disabled when a violation occurs, but a notification of the security violation is generated and packets from the unknown source are dropped.
S1(config-if-range)# switchport port-security violation restrict
e. Disable all the remaining unused ports. Use the range keyword to apply this configuration to all the ports simultaneously.
S1(config-if-range)# interface range f0/3 - 24 , g0/1 - 2
S1(config-if-range)# shutdown
Step 2: Verify Port Security
a. From PC1, ping PC2.
b. Verify that port security is enabled and the MAC addresses of PC1 and PC2 were added to the running configuration.
S1# show run | begin interface
c. Use port-security show commands to display configuration information.
S1# show port-security
S1# show port-security address
d. Attach Rogue Laptop to any unused switch port and notice that the link lights are red.
e. Enable the port and verify that Rogue Laptop can ping PC1 and PC2. After verification, shut down the port connected to Rogue Laptop.
f. Disconnect PC2 and connect Rogue Laptop to F0/2, which is the port to which PC2 was originally connected. Verify that Rogue Laptop is unable to ping PC1.
g. Display the port-security violations for the port to which Rogue Laptop is connected.
S1# show port-security interface f0/2
Close Configuration Window
Question:
How many violations have occurred?
h. Disconnect Rouge Laptop and reconnect PC2. Verify PC2 can ping PC1.
Question:
Why is PC2 able to ping PC1, but the Rouge Laptop is not?
you can also watch my other videos, the following playlist are given below
::::::::::::::::HCNA R&S::::::::::::::::::::::::::::::::::::::::::::::::
Video Play list = [ Ссылка ]...
::::::::::::::CCNA Scaling Network::::::::::::::::::::::::::::::::::::::
Video Play list = [ Ссылка ]...
::::::::::::::CCNA Ethical hacking:::::::::::::::::::::::::::::::::::::
Video Play list =[ Ссылка ]...
::::::::::::::Cisco Networking::::::::::::::::::::::::::::::::::::::::::
Video Play list = [ Ссылка ]...

::::::::::::::Cisco IoT::::::::::::::::::::::::::::::::::::::::::::::::::
Video Play list =[ Ссылка ]...

::::::::::::::C Programming::::::::::::::::::::::::::::::::::::::::::::::::
Video Play list =[ Ссылка ]...

::::::::::::::Tech Videos::::::::::::::::::::::::::::::::::::::::::::::::
Video Play list = [ Ссылка ]...

::::::::::::::General Knowledge and recreational:::::::::::::::::::::::::::
Video Play list = [ Ссылка ]...

::::::::::::::Kids Math::::::::::::::::::::::::::::::::::::::::::::::::
Video Play list = [ Ссылка ]...

::::::::::::::English Grammer ::::::::::::::::::::::::::::::::::::::::::::::::
Video Play list =[ Ссылка ]...

HaiderTech Provides all latest technical and other development videos, in these videos especially includes, Kali Linux Learning tutorials, Windows Tutorials, Ethical hacking, Python Programming, C Programming, Huawei HCIA R& S, Cisco networking , CCNA, Mathematics, English grammar, IOT, Raspberry Pi tutorials, Windows servers configuration, Technology news, and motivational Speeches, English and Urdu language

свернуть