VMP developed the ultimate upgrade for '11-'17 Ford Mustang GT owners with our new VMP Performance Billet Coyote oil pump gears and crank sprockets.

With this upgrade, owners of high horsepower S550s will no longer have to worry about their stock oil pump gears causing damage to their Coyote engines.

In this video, we provide you with a step-by-step how to guide on the correct way to install your new VMP Coyote oil pump gears.

Make sure you watch until the end for some "scientific" durability testing of the stock oil pump gears with Andrew at Mustang Lifestyle.

✪ VMP Oil Pump Gears for '11-'17 5.0 L Mustang: [ Ссылка ]

00:49 | Disconnect battery
00:55 | Lift car up
1:01 | Drain engine coolant
1:25 | Remove MAF sensor plug from CAI
1:39 | Remove CAI
1:44 | Remove coolant Degas bottle and hoses
2:07 | Remove supercharger belt
2:30 | Remove air box
2:34 | Remove throttle body
2:37 | Remove upper radiator hose and radiator fan assembly
2:53 | Take hose off thermostat
3:11 | Remove thermostat assembly from engine
3:34 | Remove water pump pulley
3:45 | Remove supercharger idlers and tensioner
4:17 | Remove supercharger pulley
4:29 | Remove supercharger support bracket
4:39 | Remove alternator
5:07 | Disconnect PCV hoses from valve covers
5:14 | Remove coil covers
5:17 | Disconnect and remove ignition coils
5:45 | Disconnect wiring clips to cam phasers
5:54 | Disconnect fuel injectors
6:06 | Remove bolts and take off valve covers
6:29 | Take bolts out and remove water pump
6:37 | Remove bolts from sway bar for better access to engine
6:56 | Remove bolt from crank pulley
7:03 | With pulley removal tool, remove the crank pulley and stretch belt
7:26 | Remove bolts from oil pan that go into the bottom of the timing cover
7:37 | Remove all timing cover bolts
7:50 | Remove timing cover from engine
7:59 | Remove spark plugs
8:09 | Install stock bolt back onto crankshaft with spacers
8:25 | Verify the timing mark on the Billet unit is on top
8:40 | Remove the bolts and the RH primary timing chain tensioner
8:51 | Remove the bolts and the RH primary timing chain guide
9:04 | Remove the RH timing chain
9:09 | Rotate the crankshaft clockwise until the keyway is at 5 o'clock position
9:17 | Remove bolts and the LH primary timing chain tensioner
9:29 | Remove the LH timing chain tensioner arm
9:38 | Remove the bolt and LH timing chain guide
9:53 | Remove the LH timing chain
9:56 | Remove crank bolt and chain sprocket
9:59 | Remove bolts from oil pump housing to oil pickup
10:23 | Remove bolts holding oil pump housing to engine
10:29 | Remove oil pump housing
10:43 | Take apart oil pump housing
10:58 | Remove stock OPG assembly
11:04 | Use engine assembly lube for new OPG installation
11:07 | Apply lube to new VMP OPGs and oil pump housing
11:22 | Reassemble oil pump housing
11:40 | Reinstall oil pump housing with new VMP oil pump gears
11:55 | Install new VMP crank sprocket on crankshaft
11:56 | Install the LH timing chain
13:50 | Install LH timing chain tensioner arm
13:55 | Compress the primary timing chain tensioner plunger
15:26 | Remove holding pin from tensioner
15:31 | Rotate crankshaft clockwise back to 5 o'clock position
15:47 | Rotate crankshaft clockwise until the keyway is at the 12 o'clock positon
16:12 | Install BH timing chain
16:56 | Install the RH timing chain tensioner arm
17:11 | Compress the primary timing chain tensioner plunger
19:11 | Remove holding pin from tensioner
19:20 | Place rag over oil pan opening
19:31 | Scrape old gasket material from timing cover surface
19:50 | Apply new RTV to timing cover and reinstall on engine
20:22 | Scrape out old RTV from crank pulley keyway
20:25 | Apply new RTV to keyway
20:37 | Install crank pulley
20:44 | Use longer install bolt to start pressing pulley onto crankshaft
21:07 | Remove install bolt and finish install with stock bolt
21:38 | Reinstall stretch belt
21:52 | Bolt sway bar into place
21:56 | Reinstall stock water pump
22:10 | Reinstall spark plugs
22:15 | Scrape all RTV from valve cover surface
22:21 | Apply new RTV
22:31 | Reinstall valve cover
23:08 | Reinstall ignition coils
24:10 | Plug in cam phaser electrical connections
24:20 | Plug in fuel injectors and ignition coils
25:19 | Reinstall dipstick
25:34 | Reinstall coil cover
25:40 | Reinstall alternator
26:42 | Reinstall tensioners and supercharger belt system
27:18 | Reinstall water pump pulley
27:43 | Reinstall supercharger pulley
28:31 | Reinstall thermostat housing and connect hoses
29:14 | Reinstall supercharger belt
30:41 | Reinstall fan assembly
31:08 | Reinstall factory coolant degas bottle and all hoses
31:36 | Reinstall air box
32:02 | Reinstall CAI
32:44 | Reinstall air box lid
32:54 | Reinstall factory coolant system

свернуть