Learn the top 7 must-know tips and tricks for your jet pump system!
Purchase the M4 Pressure Switch: [ Ссылка ]
How to Wire a Pressure Switch: [ Ссылка ]
How to Check and Adjust Pressure Tanks: [ Ссылка ]
1. Swap your pressure switch with low pressure cut off for cheap pump protection
2. Install a riser pipe on the jet pump for easier priming. Also a ball valve on the discharge can also ease priming by allowing you to work the air out of the pump and line.
3. Using a cycle guard or similar device to keep the pump running while using water will extend pump life greatly
4. Write your purchase date on all equipment so there is no question about age
5. Keep all well related documents, like your driller report, in a gallon bag near your pump breaker or outlet for easy access anytime you need it or your service technician.
6.. Take an amp reading while system is running. Be sure to keep your test method consistent. If you are using an irrigation pump without a pressure tank you could use your irrigation zone 1 for example to get a consistent amp reading.
7. 7. What’s in your water - get it tested - test annually for best results especially if you have a history of problems or are near livestock
Have a question? You can live chat with us at [ Ссылка ], call 855.329.4519, or email Customer.Service@RCWorst.com to speak with an industry expert.
Add us to your professional network: [ Ссылка ]
Follow us on Twitter: [ Ссылка ]
Like us on Facebook: [ Ссылка ]
For more industry videos visit our YouTube Channel: [ Ссылка ]
We are a distributor of pumps, packaged pumping systems, on-site wastewater treatment equipment, on-site wastewater treatment systems, and custom electrical control panels for water and wastewater applications, water well supplies, drilling supplies, and water treatment equipment.
