How to Apply a Natural Finish on Softwoods:
Examples: Pine, Cedar, Poplar, etc.

How to apply this finish:
1. Sand the project up through the grits until at least 220-grit
a. It is a good idea to sand pieces that will be hard to reach before assembly.
2. Wipe the project with mineral spirits to check for glue splotches
3. Apply a sealer coat (Zinsser Sealcoat) of a shellac-based finish by wiping: flooding the surface with finish and wiping it off.
4. If you have any nail holes, cracks or defects in the wood, fill them now with a wood filler putty that matches the color of the oiled wood (sand smooth)
5. Apply at least two coats of a wipe-on polyurethane
6. Optional: After the finish has cured for 72 hours, apply a coat of high-quality paste wax and then polish it off.

Supply Checklist:
- Sandpaper: 80-grit through 220grit (320- and 400-grit recommended)
[ Ссылка ]
- Mineral Spirits
[ Ссылка ]
- Synthetic Finishing Pads
[ Ссылка ]
- Wonderfill Wood Filler
[ Ссылка ]
- Zinsser Sealcoat
[ Ссылка ]
- Urethane Top Coat
[ Ссылка ]
- Liberon Wax
[ Ссылка ]
- Shop towels or clean rags

Subscribe to this channel for more of the latest woodworking how-to videos and new product innovations. Click the red subscribe button at: [ Ссылка ]

Find the best woodworking products and innovations at: [ Ссылка ]

свернуть