Kia Engine Knocking Noise. KIA Engine Issues. 2.4 L GDI.
KIA Bearing Clearance Test. P1326 knock sensor range performance.


0:00 - Introduction.
0:10 - Vehicle.
0:20 - Customer’s concern.
0:26 - Verification.
0:47 - Diagnostic.
5:40 - Conclusion.

0:10 - Vehicle.
The vehicle being inspected today, Is A KIA. 4 cylinders, 2.4 liters GDI ENGINE.

0:20 - Customer’s concern.
The customer states, that there is a noise coming from the engine compartment.

0:26 - Verification.
The technician verified, that the engine is making a knocking noise, and that the noise is coming from the crankcase area and it gets louder with higher RPMs.

0:47 - Diagnostic.
The technician performs a scan test and code P1326 knock sensor range performance is active.
Then proceeded to perform KIA’s bulletin for code P1326. bulletin PI1802Y/Z.
Bearing clearance inspection with the engine bearing clearance tester device SST KQ231-2T110QQK.
The tech then removes all the spark plugs, inserts the clearance gauge probe rod in the spark plug hole and tightens it by hand, starting with cylinder 1.
With the crank rotator wrench the technician rotates the crankshaft clockwise until the piston reaches TDC in the compression stroke, the scanner will signal the tech when to stop turning the crankshaft.
Now with the air hose from the SST box to the clearance gauge, depending on the switch selected position, the tester will provide air in the AP position, and vacuum in the VC position, measuring the movement of the piston with the clearance gauge.
The tech will repeat this procedure for all the cylinders.

5:40 - Conclusion.
The tester will record the measurements of each piston and provide a final result of pass or no pass. If the result of the test is no pass, the engine will need to be replaced.
Contact your dealer’s service department for warranty information before paying for any repairs.

Bulletin PI1802Y/Z: [ Ссылка ]

-- Let me know in the comments any specific request.

Subscribe now for more!

⚠ DISCLAIMER:
While CARCHEK strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. CARCHEK is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

#carchek #carrepair #cars #vehicles

свернуть