This shows an installation of a Toto S550e (Toto SW3054#01) bidet seat on a wall hung toilet (aka wall mount toilet). It's more complicated than for a regular toilet (standard floor mount) so I've shown one solution by using some adapters and a long dishwasher supply line to get water from the sink in the vanity over to the bidet seat. Tried to hide the connections as much as possible so when you walk in you don't see a bunch of hose/wire showing.

Some of the parts used:
* Toto THP3141 adapter: converts proprietary Toto connector to standard 1/2in thread (NPSM, MIP). Bought on Amazon for around $15
* BrassCraft CT2-666X Valve Adaptor: a tee adaptor that allows you to tap off of the sink cold water supply, has 3/8in compression threads all around. Bought at Home Depot for $6
* Everbilt LFA-124 Adapter: converts 3/8in compression to 1/2in thread (NPSM, MIP). Bought at Home Depot for around $7
* Everbilt 520 Universal Dishwasher Supply Line, 8ft, stainless steel, both ends 3/8in compression. Bought at Home Depot for around $20
* HushBumps Ultra-Quiet Gel Bumpers - used to dampen the sound when the lid raises and hits the flush plate (these work better than the bumper supplied by Toto). Bought on Amazon for $10.

свернуть