Follow this how-to video of the Korky QuietFILL® for routine maintenance.

Korky® QuietFILL® Toilet Fill Valve

Universal replacement for faulty toilet fill valves and ballcocks
Proven quietest in laboratory testing
Easiest to install and adjust
Fixes: No/slow filling toilet, toilet constantly running, noisy flushing toilet

Hello and welcome to Korky toilet repair. Today we are going to show you how to service all models of Korky Fill Valves. The first step is to shut off your water supply. Then flush your toilet to drain the excess water. Remove the refill tube from the fill valve. To remove the valve cover, place your thumb under the tab and pull up. Remove the float by gently pinching the float arms together. Locate the rubber pilot seat on the underside of the float arm. Ensure the pilot seat is flush with the surface of the arm. It is normal to see a dimple in the center of the pilot seat. Hold the valve body with one hand and twist the cap counterclockwise 1/8 turn to remove. Run the cap under warm water and gently rub the red diaphragm to remove any buildup. Next remove the supply tube from the fill valve. Pull the white strainer from the bottom of the supply tube. Rinse the strainer under warm water to remove any sediment. Now, insert the strainer back into the supply tube. And insert the supply tube back into the valve body. Twist the cap assembly clockwise to lock it on the fill valve. To reattach the float, pinch the float arms in and clip them to the valve body. Tap the top of the float to make sure the float moves freely and does not scrape on the sidewall of the float chamber. Snap the valve cover back into place. Ensure the valve is locked into place by turning it clockwise. Reattach the refill tube to the fill valve…
and clip the refill tube to the overflow tube. Turn your water supply back on to complete the service. If you have any questions or need further assistance with your service, please visit our website or call us at 1 800 528 3553.

Korky® QuietFILL® Toilet Fill Valve 528

свернуть