BIG TIP: don't over-torque the T3 screws on the connector covers. it's super easy to strip the screw heads.
kinda long winded, check the timestamps

little tip: don't be too afraid when unclipping the bottom cover. It's just a U shape metal wire that's held down by plastic and the open ends clip onto a post.

I nearly flubbed this one. a little more complicated than the switch lol

MacBook Pro (15-inch, 2018)
2.6 GHz 6-Core Intel Core i7
32 GB 2400 MHz DDR4
Radeon Pro Vega 20 4 GB
1TB Storage

0:00:00​ Waiting Room
0:00:54 it begins
0:05:30 they totally have pentalobe
0:05:42 i'm a idiot
0:12:45 suction failure
0:25:27 words can't describe what i tried to say here
0:27:32 got my thumb in there
0:32:21 it's open!
0:32:47 what thermal paste i'm using
0:33:33 look at that dust
0:34:14 brb de-dusting cover
0:36:25 brb de-dusting top case
0:39:11 back from dusting
0:45:39 unclipping the first thingy
1:15:28 how i have the screws arranged
1:18:12 the logic board is freed
1:21:25 jump scared by the spring loaded thingy
1:25:59 GOOP REVEAL
1:28:34 gooptography
1:30:41 cleaning the heatsink
1:35:10 cleaning the cpu die
1:38:17 cleaning the gpu die
1:50:45 FRESH GOOP APPLICATION
1:53:39 GPU GOOP-ING
2:00:21 putting the heat sink back on
2:01:52 springy clips go back in
2:07:15 NT-H2 lasts for 5 years (recommended)
2:07:46 putting everything back in
2:32:03 stripped the 1st screw
2:39:50 stripped the 2nd screw
2:40:26 my worst nightmare
2:40:53 trying to make light of the situation
2:45:35 placebo maybe
2:51:26 freaking the f out
2:51:53 realizing i scared myself
2:55:03 little sticker thing
2:58:04 final internal screw back in
3:03:53 closed up (snap asmr)
3:04:24 turning it back on
3:05:04 yay i didn't kill my laptop
3:07:07 checking temps
3:11:48 closing up the last 6 screws
3:13:01 clean up time
3:17:31 hairdryer on the dbrand (muted)
3:22:19 temps update
3:25:05 screen test
3:26:01 raiding on twitch
3:28:38 bye bye

previously live at twitch.tv/endawmyke

свернуть