Welcome back to the channel ya kookz!

The Vankookz Van Conversion Masterclass is Finally Here - [ Ссылка ]

First Steps in a Van Conversion Masterclass (Insulation, Framing, Ceiling, Walls, Floor) [ Ссылка ]

Get a step-by-step instructional video guide on how to build your van here - [ Ссылка ]

Today is the day for the easiest/hardest process of the DIY van conversion. It's time to cut the first holes in your van. This can be a scary task but fear not! The Vankookz are here to help. Installing your roof fan is actually one of the easier tasks in the entire van conversion process and you will feel so accomplished once you are done with this step.

You will need the following items to make this happen.
Maxx Air Fan - [ Ссылка ]
Lap Sealant - [ Ссылка ]
Butyl Tape - [ Ссылка ]
Solar Entry Gland - [ Ссылка ]

This time went with a Maxx Air fan on this van conversion because well let's face it.... It's the best option although it is expensive the other models don't compare. Trust us we have used all of them. The Fantastic Fan is trash don't waste your time or money with that junk unit. It's also very important to apply a lot of self-leveling lap sealant around the fan to make sure it's watertight. It's also very important to use butyl tape as well. We have done this process many times and this is the best way to do it.

If you follow along with this video you should have zero problems with this installation.

If you are looking for more van build tips check out www.vankookz.com for a complete guide to building your DIY van conversion.

..::CHAPTERS;;..
00:00 - Welcome Back to the Channel Ya Kookz!
00:25 - Everything you will need to install your roof fan
01:18 - Getting Prepped to Cut the Hole for Your Roof Fan
02:18 - Step 1 - Cutting Your Pilot Holes
03:31 - Step 2 - Cutting out The Hole For your Fan
04:50 - Step 3 - Rust Prevention
05:36 - Step 4 - Applying Butyl Tape
06:04 - Step 5 - Installing Your Fan
06:38 - Step 6 - Applying Self-Leveling Lap Sealant

свернуть