Towel Ring Removal With No Damage to Wall - Towel Ring Repair or Replacement in Drywall Installation

Allen Hex Key Wrenches: [ Ссылка ]
Micro Precision Screwdriver Set: [ Ссылка ]

If you want to remove a towel ring without damaging the wall, watch this short video and I'll show you how. This is really helpful if you want to paint under it or even replace it with a new one.

If you look on the bottom of the towel ring, there's a tiny set screw that needs to be loosened. And you'll need either an Allen wrench or a micro flathead screwdriver for this. It takes maybe only a couple of turns to loosen it. But only loosen it a bit because this does not need to come all the way out. Then the towel ring will lift right off.

To completely remove everything, just take out the screws for the mounting bracket. As you can see, removing a towel ring is not difficult to do. This is essentially the same process if you want to remove a towel bar as well. Underneath, there may be wall anchors that can be left there or taken out with a pair of pliers if needed.

Knowing how to do this can be helpful especially if you're renting and don't want to damage the walls. If this video was helpful, please give me a thumbs up and hit the subscribe button to stay up to date on all my DIY repair videos!


Disclaimer: As an Amazon Associate I earn from qualifying purchases.

****Equipment I Use For My Videos****

Canon EOS M6: [ Ссылка ]
Canon EF-M 22mm f/2 Lens: [ Ссылка ]
Tokina 11-16mm Wide Angle Lens: [ Ссылка ]
Fotodiox EF to EOS M Lens Adapter: [ Ссылка ]
Comica CVM-WM300A Wireless Microphones: [ Ссылка ]
Aputure Amaran AL528W LED Light: [ Ссылка ]
Kamerar SD-1 Camera Slider: [ Ссылка ]
AVermedia HDMI Game Capture Module: [ Ссылка ]

свернуть