Ford F-150 2004-2016 - How to duplicate key or program new key.
How to duplicate key or program key for my Ford F-150 2011 XLT 5.0 V8 (2 wheel drive).
How to program remote
1, Close all doors then open drivers door press unlock button on drivers door while door is open. Insert key into ignition. Keep foot off brake pedal.
2, Turn ignition from OFF to Run 8 times ending in Run ( Do not start the car, run position is just before the vehicle will start OFF is turned all the way back when the key can be removed from the ignition).
Must be performed within 10 seconds. Locks will cycle signaling entering into programming mode.
3, Press any button on the remote being programmed, locks cycle confirming programming. Repeat this step for any addition remote.
4, Turn key to OFF, locks will cycle to end programming mode.
How to program key chip
Make sure you have to have 2 working key
1, Insert 1st working Key into ignition and turn to run (do not start engine) keep it 5 to 10 seconds to automatic program, then remove 1st key. Insert 2nd working key into the ignition and turn to run(do not start engine) keep it 5 to 10 seconds and remove the key, next insert the new key into ignition and turn to run and keep it like that 20 seconds to program the new key automatic.
Finish....
[ Ссылка ]
