Design of Mechanical Component in Solidworks 2019 software for Beginners in this CAD design software.

#solidworks
#mechanicalcomponent
#CADtutorials
#beginners
#design

Like, Comments, Share and Subscribe this Channel.

Steps To Make This Simple Object:
1)select Extrude Command And Choose Any Plane.

2)Now Draw Two Circles As Per Dimensions.
3)Draw Construction Line From The Centre Of The Circle With Dimension 50mm.
4)Now Select Centerpoint Arc Command And Draw Arc As Shown.
5) Draw The Line At The End Of The Arc. Select Dimension Command And Choose Center Of Circle And End Point Of Line. Make Dimension 70mm.
6) Draw VerticalLine From End Point Of Dimension 56mm.
7) Make Two ConstructionLines As Per Video With Dimensions And Make Circle At End Point Of ConstructionLine.
8) Draw Vertical ConstructionLine At Centre Of Circle.
9) select Trim Command And Trim Unnecessary Parts.
10)Select Mirror Command And Choose Whole Sketch Except Vertical Construction Line At CentreOf Circle In ENTITY TO MIRROR.
11) Select Vertical Construction Line For MIRROR AT.
12) Delete Vertical ConstructionLine Or Let It Remain.Sketch Should Be Close Contour.
13) Exit Sketch.
14) Select Mid Plane In DIRECTION 1 and Dimension 30mm And Ok
15) Go To Reference And Select Plane Command.
16) select Surface With Size 56*30mm.
17) choose Dimension 35mm and FLIP OFFSET and Ok.
18) Select New Plane With Right Click And Select Sketch Option.
19) Draw As Per Given Dimensions With Close Contour.
20)Extrude With 15mm flip Offset.
21)select New Extruded Part And Plane Passing Through Centre Of Circle And Parallel To New Plane1.
22) select Mirror Option And Ok.
23) Object Is Ready. Now Select All Parts With Option Appearance And Select Any Color.
24) object Is Ready.


For More Tutorials please SUBSCRIBE our channel.


#solidworkstutorial
#designtutorial
#mechanical

свернуть