Replacing Pontiac G6 Battery / Pontiac G6 Windows Wont Close After Battery Replacement. After replacing the battery the pontiac g6 window sensor needs to be reset.
At 2:30 you can see the procedure for resetting the windows.
The Pontiac G6 has a known issue following power loss or battery replacement. After the car battery is replaced in the Pontiac G6 the driver side and passenger side windows will not work properly. This is specifically a problem in the Pontiac G6 Convertible in which you open the door and the window automatically moves down a bit. Then you close the door and the window automatically goes back up. However, after replacing the battery this feature doesn't work list it used to work. I found out that it is a known issue in which the computer is not properly reading the window sensor's position. It looses its position that it had before and it keeps track of this but unfortunately, this memory is not non-volatile memory and therefore it its lost. But all is not lost. You need to retrain the Pontiac G6 Engine Computer to learn the window sensor positions. To do this I had to turn the car off, then turn it to ACC then put the window up and hold the buttons in the up position until you hear a slight click (about 2 seconds) and down and hold the buttons in the down position until you hear a slight click (about 2 seconds). Eventually, the problem cleared itself.
Replacing the battery on the Pontiac G6 takes a little muscle and a bit of time. Please be aware that if you have the convertible and you replace the battery your windows will not function properly. Follow the steps towards the end of the video to correct the issue with the windows. It has something to do with the limit sensors and resetting the calibration of the windows limit sensors.
#udoit #UDoit2
“As an Amazon Associate I earn from qualifying purchases.”
Filament in my inventory:
Inland Filament -------- [ Ссылка ]
Hatchbox Black -------- [ Ссылка ]
Repkord Purple Haze Filament ----- [ Ссылка ]
Sainsmart PLA ------- [ Ссылка ]
eSun Orange PLA -------- [ Ссылка ]
Smartbuy Green PLA -------- [ Ссылка ]
eSun PETG Green -------- [ Ссылка ]
eSun PETG Black -------- [ Ссылка ]
Hatchbox PLA Red -------- [ Ссылка ]
MatterHackers #MHBuild Series --------
[ Ссылка ]
UDoIt™️ Shop: [ Ссылка ]
UDoIt™️ Store: [ Ссылка ]
![](https://s2.save4k.ru/pic/wyNaUjmku18/maxresdefault.jpg)