In this video, I go over how to service a 40 and 50-hp Tohatsu. This includes changing the oil, oil filter, lower unit gear oil, fuel filter, spark plugs, removing the prop, and replacing the impeller.

Instagram: buck_creek

Note: Many of these parts/service items are offsets to genuine Tohatsu parts. Use them at your own discretion!!

Instagram: buck_creek

As an Amazon Associate, I may receive a small commission from any items purchased from the links below.

Check out everything in one place here: [ Ссылка ]

Engine oil (Tohatsu pt no. 33282-3080M) - [ Ссылка ]

Oil filter wrench (Tohatsu pt no. 3AC-99090-0) - [ Ссылка ]

Oil filter (Tohatsu pt no. 3R0076150M) - [ Ссылка ]

Gear lube (oil) for the lower unit (Tohatsu pt no. 33282-3100M) - [ Ссылка ]

Additional (Gear lube pump) - [ Ссылка ]

Spark plug (Tohatsu part no. 9701-1-1121) [ Ссылка ]

Power trim/tilt fluid (Dexron III) - [ Ссылка ]

Fuel filter (Tohatsu part no. 3B7-02234-0) - [ Ссылка ]

Water pump impeller (Tohatsu part no. 3C8-65021-2) - [ Ссылка ]

2-4-C Marine grease - [ Ссылка ]

_________________________________________________________________

Additional tools for service

Digital torque adapter 3/8” - [ Ссылка ]

Oil drain pan - [ Ссылка ]

Rubber mallet - [ Ссылка ]

__________________________________________________________________________

Torque specs and additional info

Engine oil with oil filter change (without oil filter change) - 2400ml roughly 2.5 quarts (2200mL roughly 2.3 quarts)

Engine oil drain plug - 17 ft-lb

Oil filter - 13 ft-lb

Gear oil - roughly 500ml or roughly 1/2 a quart

Spark plug - 13.3 ft-lb

Bolts holding lower unit to upper limit 38-45 ft-lb (not given in the manual this is rather a general spec for the industry)

свернуть