SUBSCRIBE Learn how tile the right way
Huge, steam shower installation from studs to tile with modern materials and traditional mud floor combined to create a waterproof shower. This shower has an area for a tub, the shower floor and main floor a both heated with radiant electric heat by Schluter Ditra Heat floor warming system. Wallboard used is a lightweight foam board by schluter, Kerdi-Board, used both on the shower walls and ceiling to create a water and vapor tight environment suitable for a steam shower. The bench seat was constructed of 2” kerdi-Board, which simplifies the construction by using a light weight foam board, which is very strong and easy to assemble and make water tight with the use of Kerdi-Band, the bench was also heated for a comfortable warm experience when used. The very large shower floor was created with a level area where the tub will sit and a sloped area for the shower portion, sloped to a Schluter Kerdi-Line linear drain. The floor was floated with deck mud and then covered with Ditra heat membrane for the heat wire element, then sealed with Kedri sheet membrane as required in a wet area. A large format ceramic tile was used on the shower walls and ceiling installed with T-Lock leveling system, and a Hexagonal mosaic tile was used on the shower floor, a larger hex tile was used on the heated main floor. As a note, hexagonal tile was very popular years ago, but faded in popularity for quite some time, they are now making a return even as large format tiles. This video time lapse shows the entire installation of the bathroom tile, from the studs to the finished installation of all the tile, wall tile, ceiling tile, mosaic shower floor tile and hexagonal main floor tile. Even though it would have been possible to use a large format tile on the shower floor, because the floor had a flat surface pitched to a linear drain, the homeowner decided to use a black hexagonal mosaic tile. An advanced grout was used to grout the walls and floor, White grout on the ceiling and two shades of gray for the walls and floors. All tile installed by Sal DiBlasi, Elite-tile Company, in the Boston North Shore area. This video contains affiliate links, which means I will receive a small commission if you click on the product link. #tile #transformthetrade #howtotile #installingtile #howtoinstalltile #Schlutersystems #TCNA
🙂 This is my Amazon Store 🙂
[ Ссылка ]

💲1 PDF Floor installation guidelines [ Ссылка ] 💲1

👍 Patreon [ Ссылка ] 👍
YouTube Channel [ Ссылка ]

Facebook
[ Ссылка ]

Website
[ Ссылка ]

Twitter
[ Ссылка ]

Instagram
[ Ссылка ]
National Tile Contractors Association
[ Ссылка ]

Channel Store [ Ссылка ]
👇 Some of my favorite Tools 👇
Float [ Ссылка ]
Rubbing Stone [ Ссылка ]
Notched Trowel 1/4 x 1/4 x 1/4-inch [ Ссылка ]
Notched Trowel 1/2 x 1/2 x 1/2-Inch [ Ссылка ]
Notched Trowel 1/4 x 3/8 x 1/4-Inch [ Ссылка ]
Super Dust Collector – WaleTale [ Ссылка ]
Black Nitrile Gloves - 6 mil [ Ссылка ]
Margin Trowel [ Ссылка ]
Mortar Mixer [ Ссылка ]
4in Sandpaper for Stone Polishing [ Ссылка ]
Polishing Rubber Backing Pad [ Ссылка ]
Montolit 63P3 24 Inch Tile Cutter [ Ссылка ]
DEWALT Wet Tile Saw [ Ссылка ]
Rubi Thinset mixer [ Ссылка ]
Opt into NTCA’s VIP Text Messaging program for training opportunities. Text “NTCA” to 31996 or Visit [ Ссылка ]... For Industry Professionals only

свернуть