My review of the eSun PETG on the Prusa i3 MK2. Used the stock settings for the Prusa i3 MK2 and Simplify3D to print the model. I did enable Z-Hop or Z-Lift and I sliced with Simplify3D.

Temp - 240c
Bed - 80c
Speed - 40mm/sec
Layer - 0.2mm
Infill - 30%
3 Top, 3 Bottom, 3 Perimeter
Cooling -
1st Layer Fan 0%
2nd Layer Fan 50%
3rd Layer Fan 100%

Model - [ Ссылка ]

Music by [ Ссылка ]

свернуть