In this video you're going to see exactly what drives the scooter error I was getting, what broke this scooter, and how I fixed it. I'm also going to show you a mistake I made and tell you how to do it the proper way. Also -there was more than just this E2 error, and if you stick with me to the end I'll show you how I fixed some screws that had just given up.

Hover 1 Electric Scooter: [ Ссылка ]
Throttle Accelerator: [ Ссылка ]
Replacement Brake Light: [ Ссылка ]
Butt Splices: [ Ссылка ]
Marine Grade Shrink Wrap: [ Ссылка ]
Soldering Iron: [ Ссылка ]

Error Codes:
Error E1 - Motor failure, motor needs to be replaced.
Error 2E - Accelerator failure, accelerator needs to be replaced.
Errors 3E - Motor blocking fault, release the accelerator.
Error E4/MOS - Mainboard MOS failure, replace mainboard.
Error E6 - Controller/instrument communication failure, the controller needs replacing.
Error E7 - Battery over-voltage protection, battery needs replacement.
Error E8 - Controller error, controller needs to be replaced.
Error E9 - Brake failure, brake needs to be replaced.

The Camera gear I own and use for videos (I use multiple cams for different angles):
Perfect Camera for walking around - DJI Action 2: [ Ссылка ]
Gimbals are everything and make shooting easier - DJI Pocket 2: [ Ссылка ]
First RF series camera - great for 4k - Canon R6: [ Ссылка ]
Beast mode cam for action shots and video - Canon R3: [ Ссылка ]
Wide ranging lens great for video zoom - Canon 15-35mm lens: [ Ссылка ]
Cost effective fixed RF lens - Canon 35mm lens: [ Ссылка ]
Very wide shots for your RF cam - Canon 16mm lens: [ Ссылка ]
A must have tripod for your camera gear - Joby Tripod: [ Ссылка ]

#escooter #scooterfix

свернуть