Is your Dreame T20 facing battery overheating problems? Or perhaps the roller brush is stubbornly stuck? Don't worry – we've got you covered! This episode will teach you how to solve the issue by yourself of T20. Join us as we address these concerns and more, providing you with practical solutions to keep your Dreame T20 performing at its best.

🚀 Let's empower you with the knowledge to fix the Dreame T20 battery overheating issue, unstick that roller brush, tackle air duct blockages, and troubleshoot any cordless stick errors that may arise. Plus, we'll guide you through the proper cleaning process for the dust compartment and cyclone assembly, ensuring your Dreame T20 stays in top-notch condition.

-- TIMESTAMPS --
0:00​​​​ Intro
0:06 How to Fix Dreame T20 Battery Overheating Issue
0:22​ How to Fix Dreame T20 Roller Brush Stuck Issue
0:47 How to Fix Dreame T20 Air Duct Blocked Issue
1:01​ How to Fix Dreame T20 Cordless Stick Error
1:14 How to Clean the Dreame T20 Dust Compartment
2:03 How to Clean the Dreame T20 Cyclone Assembly

Fully charging will take about 4 hours. Vacuuming at Turbo mode for a prolonged period will cause the battery to heat up, which increases charging time. Please wait and continue to use it after the motor temperature is normal.

If there is a state of Roller brush stuck, we need to clean the rollerbush. Use scissors to cut off the hairs and fibers that stick on the roller brush. The correct operation is to collect the data cables and wired headphones in the house to avoid getting involved in the vacuum cleaner before using it.

If the air duct is blocked, check whether the dust compartment extension rod and smart multi-brush bar are blocked to make sure clean the air duct in time.

The crevice nozzle is suitable for vacuuming cracks, corners of doors and windows, stairs, and other hard-to-reach places. If an error appears in the display, don't hesitate to get in touch with our after-sales service personnel for maintenance.

The vacuum cleaner's cleaning ability will be reduced if the dust compartment is filled to the "MAX" mark. Press the dust compartment bottom cover release button, then empty the contents. Push the dust compartment release switch in the direction indicated by the arrow, then gently remove the dust compartment from the vacuum cleaner. (It is recommended to clean the dust compartment once every month)

When cleaning the cyclone assembly, remove the pre-filter first (It is recommended to clean the pre-filter at least once every 3 months and the cyclone system at least once every 6 month) then lift the handle of the cyclone assembly and turn to counterclockwise until it stops, then pull to lift out the cyclone assembly. Rinse the cyclone assembly, pre-filter and dust compartment until they are clean. After washing, air dry at least 24 hours.

🥰We also want to hear from you! Share your Dreame T20 experiences and cleaning tips in the comments below. Get more information about Dreame T20👉[ Ссылка ]

🔔Don't forget to subscribe for more heartwarming stories, tech magic, and festive cheer from Dreame!
Stay connected with us on social media:
YouTube: [ Ссылка ]
Instagram: [ Ссылка ]
Facebook: [ Ссылка ]
Twitter: [ Ссылка ]
LinkedIn: [ Ссылка ]
#DreameT20 #DreameTech #DreameGuide

свернуть