Meet the McFly cutter: A wood-devouring cutter that will save you time and last well into the future with 4 user-replaceable carbide inserts.
Available now in our store: [ Ссылка ]
Suggested starting speeds and feeds:
16,000 RPM
60 Inches/min (1500 mm/min)
0.02" Depth of Cut (0.5 mm)
Notes:
The physics and mechanics of machining are complex, and wood behaves differently depending on its orientation. In some instances where the dominant wood grain direction is not horizontal, running the McFly cutter without the two bottom inserts may produce a superior surface finish.
Always run the McFly cutter in a balanced configuration (2-inserts, or 4-inserts), and do not exceed 24,000 RPM.
