Hey Guys! I am back with another tutorial and TODAY, we are talking ALL THINGS M.2 NVME SSD's. From cloning, replacing, installing, enclosures, extending / moving partitions, to everything in between! If you have ANY questions or concerns, comment down below. Here is what you are going to need:

NOTE: You are going to want to make sure that BITLOCKER is DISABLED before performing this procedure. If it is ENABLED before the clone, you might have an issue with extending the partitions later on. So make sure BITLOCKER is DISABLED. You can disable it by going into Privacy and Security - Device Encryption - Set it to OFF.

Remember, DO NOT erase or do anything with your original drive until you are FULLY DONE WITH THIS PROCEDURE. That way, if you do run into an issue, you can stick your old drive back in and try again.

Let me know if you have any questions and thanks for the support.

If you don't have an open M.2 NVME slot on your motherboard to clone to, you will need an M.2 NVME SSD Enclosure ( Highly recommend one even if you do, so you can use an M.2 drive as an external drive ):
[ Ссылка ]

It also appears there is an updated version of the M.2 NVME enclosure I linked above this.
[ Ссылка ]

Macrium Reflect, which is what we will use to clone our old drive:
[ Ссылка ]

In the possibility that you'll need to move partitions around:
[ Ссылка ]
( You only need mini partition wizard, you don't have to download anything else it recommends during the install process ).

The 2TB M.2 NVME SSD that I used:
[ Ссылка ]

------------------------------------------------------------------------------------------------------------------

My Main PC and Setup Gear:
Case ~ Omen 45L: [ Ссылка ]
MoBo ~ GigaByte AORUS X570 Elite: [ Ссылка ]
CPU ~ AMD 5900x: [ Ссылка ]
CPU Cooler ~ NZXT Z73 360mm: [ Ссылка ]
GPU ~ EVGA 3080 FTW3 Ultra: Check EVGA's Website...
RAM ~ Crucial Ballistix: [ Ссылка ] ( x2 )
PSU ~ Antec 850w Gold: [ Ссылка ]
PSU Extensions ~ AsiaHorse: [ Ссылка ]
SSD ~ WD Blue 2.5": [ Ссылка ] ( 2TB )
SSD ~ WD Black m.2 NVME: [ Ссылка ] ( 1TB )
Fan ~ 120mm Noctua NF-F12: [ Ссылка ] ( x3 / RAD )
Fan ~ 120mm Lian Li Infinity SL 120: [ Ссылка ] ( x2 / 3-pack )
Y-Split Cable ~ Noctua: [ Ссылка ] ( x3 )
Thermal Paste ~ Noctua: [ Ссылка ]
Thermal Paste Spreader ~ Grizzly: [ Ссылка ] ( 3 Pack )
Keyboard ~ Logitech G915TKL: [ Ссылка ]
Mouse ~ Logitech G-Pro Wiresless: [ Ссылка ]
Headset ~ Logitech G533: [ Ссылка ]
Wrist Pad ~ Glorious Gaming: [ Ссылка ]
Audio Interface ~ Focusrite Scarlett Solo: [ Ссылка ]
Ring Light ~ Neewer: [ Ссылка ] ( x2 )
J Channel Cable Raceways: [ Ссылка ]
Desk Decor ~ XBox Controller Stand: [ Ссылка ]
Desk Decor ~ RGB Sphere: [ Ссылка ]
Speakers ~ Yamaha HS5 Studio Monitors: [ Ссылка ]
Speaker Stands ~ Gator Frameworks: [ Ссылка ]
Headphones ~ BeyerDynamic DT990 Pro: [ Ссылка ]
Foot Rests ~ Everlasting: [ Ссылка ]
Camera ~ Sony A6400: [ Ссылка ]


Amazon Affiliate Links:
( When you buy through an affiliate link, I may receive a commission on the sale - as an Amazon Associate, I earn from qualifying purchases. Prices of the products do not change because of the created link )

------------------------------------------------------------------------------------------------------------------

Socials:
My Discord ~ [ Ссылка ]
TikTok ~ [ Ссылка ]
Twitch ~ [ Ссылка ]
Instagram ~ [ Ссылка ]

------------------------------------------------------------------------------------------------------------------

Business Inquiries:
Dankamcontact@gmail.com

------------------------------------------------------------------------------------------------------------------

Chapters:

0:00 - 1:02: Intro
1:02 - 3:47: What You Are Going To Need
3:47 - 6:42: A Few Important Notes On The Process
6:42 - 10:40: If You Are Using An M.2 Enclosure To Clone
10:40 - 14:43: If You Have An Open M.2 NVME Slot On Your Motherboard
14:43 - 20:34: The Process of Cloning Your M.2 NVME SSD Boot Drive
20:34 - 21:14: Cloning Progress and Once It's Finished
21:14 - 22:46: A Few Notes After The Process Finishes
22:46 - 23:17: Replacing the Cloned M.2 Drive and First Boot
23:17 - 29:47: Extending Volumes and Moving Partitions
29:47 - 30:39: Restarting and Verifying Partitions Successfully Moved / Extended
30:39 - 36:05: Erasing / Cleaning the OLD Drive
36:05 - 37:07: Outro - THANKS FOR WATCHING!

свернуть