Review of Avolites Q3 Media Server, Titan Net Processor and Titan Net Switch. The Avolites Q3 Media Server features:
GUI Output DVI-D (1920x1080)
Video Output 2x DVI-D, 1x DisplayPort 1.2
Video Sync BNC Genlock (Option)
Network 2 x Gigabit LAN
Audio Out L&R Balanced XLR
Audio Ground Lift
Rear Panel USB 2x USB 3.0
Front Panel USB 2x USB 3.0
MIDI In 1x 5-pin din
SMPTE Timecode XLR In/Thru
DMX Art-Net
Capture Cards 1
TheTitan Net Processor features:
16 Universes processed
8 DMX512 outlets optical and galvanic isolation
SMPTE balanced input
MIDI in, thru and Out
2 Gigabit Ethernet ports, either fitted at the front or back of the unit (fitted to the front ex-works)
Bright 800x600 touch sensitive LCD slated upwards
Integral part of the Titan console family with a dedicated UI on the console
Two USB2 sockets at the front
Build in UPS (5 x 5 minute session without charging)
100~240v AC main input range
Intel i5 processor, 2Gb Ram, fast SSD drive for the system
Processing unit is mounted on a shock mounted frame
Plated and painted steel enclosure, 3HE x 19” x 368mm deep (from front strip), 58mm protrusion from the front strip
The Titan Net Switch features:
1 OpticalCON optical input.
6 Ethercon outlets with status indication above the outlet
for easy status checking.
Integrated LCD display for easy configuration and status reporting.
Built in UPS - Maintain the network during mains outages.
Titan Net integration with Avolites Titan Consoles (v10), status and topology information and network warnings such as lost connections, bad network speed or faulty cables. Confirm status info from your console.
Can be used by direct connection to the Avolites Arena console or in pairs to any Avolites Titan console.
Connect FOH to the stage with Cat5E Ethernet cables, up to 100m dependent on cable quality.
The Optical port connection can be used to bridge distances larger than the 100m Ethernet, depending on the fibre used this can be 225m-550m (multimode) or 10Km (single mode)
Ports usable at 10,100 and 1000Mbps
Bandwidth: 20Gbps full duplex
Network latency 1000Mbps: Less than 4μs
1 front 0pticalCON optical input at the front (850nm multimode as standard, single mode optional)
6 front Ethercon outlets with status indication above the outlet for easy status checking
1 front status indication for rear mounted EtherCON outlet
1 rear Ethercon outlet with status indication above the outlet for easy status checking
IEC mains inlet compatible with the IECLock(TM) connector
Dimensions - 1 Rack Unit x 270mm deep
Ещё видео!