In this video, I rebuild the front caliper on my Street Bob. No talking this time, so enjoy the silence. Torque specs below.

Note: The manual says not to use any metal picks to remove the seals, but I always do - just be careful not scratch the interior of the caliper cylinders.

Here's the kit I'm using from J&P Cycles:
[ Ссылка ]

Torque Specs:
Assembly Bolt: 28-38 ft/lbs
Mounting Bolts: 28-38 ft/lbs
Pad Pin: 15-16 ft/lbs
Banjo Bolt to Front Caliper: 17-22 ft/lbs

свернуть