After my last woodworking project(Table) i had some epoxy left over. So i decided to make a lamp out of wood and resin and combine it with a few experiments. I did not want to use a battery powered lamp, instead i used a low heat generating refrigerator lamp. The epoxy i bought is for pouring heights of max 1cm(0,4 Inch) at 20°C (68° Fh), but i decided to use this and let the epoxy overheat to generate some cracks and maybe nice effects. The second experiment is using toner ink for coloring the epoxy. Also i am using only electric handtools, no tablesaw, no bandsaw, no bench drill. The third experiment is not using a complete mold, but just a half and some masking tape... which failed!
#woodworking #epoxyLamp #resinArt
![](https://i.ytimg.com/vi/z1ADYpGHM0k/maxresdefault.jpg)