[ Ссылка ] | The newest member of the DK2 trailer line up - the Hot Dipped Galvanized 5 x 7 Utility Trailer. The MMT5X7G is fully welded and hot dipped Galvanized to protect the steel from the elements especially in coastal regions.

STEPS:

1. Place springs and each half of the tongue in place on the frame and tighten

2. Insert safety pins on each side to secure tongue

3. Install the coupler

4. Make sure the front bolt passes through the middle link of the safety chain as it is inserted through the tongue

5. Plug in main wiring connection running along center of trailer

6. Tuck wires up using the holders

7. Install the axle to the springs using the 4 U bolts fastened to the spring plate

8. Make sure all 4 nuts are tightened equally to clamp with the same amount of force

*Bearings come pre greased but we recommend you add more grease using a grease gun before use*

10. Remove each wheel nut and secure the tire to the axle

*Make sure each nut has the tapered end facing inwards to the rim*

*Tires will have to be re tightened before road use*

13. Flip the trailer over ** This will require more that one person as the trailer is very heavy at this point

14. Install the fenders using the two nuts and bolts

15. Install the side panels using the nuts and bolts provided

16. Install the marker lights after placing the pre wired quick connection through the hole

17. Remove the tail lights from each of their holders

18. Install the holders to each side of the trailer

19. After holders are installed fasten each light to the holders using the pre inserted hardware

20. License plate holder goes on the driver side
21. Connect the wiring for the lights

22. Install front and back gates using 2 safety pins up top and the nuts and bolts provided for bottom

*Do not over tighten bolts as it can restrict movement of the gate*

This unit offers the end user excellent value for their money and will dramatically add to the life of the trailer kit. When the front and back loadbearing gates are down, the trailer bed extends to nearly 3.5m (11.58 ft.).

Another great feature is the tilt/dump capability that makes it easy to load or unload heavy items. Fabricated from 100% steel, all of the components are reinforced, adjustable, removable and / or interchangeable.

свернуть