BUY THE AUTO PARTS you need for the operation : 👉 [ Ссылка ] 👈
📱 DOWNLOAD THE APP : 🍎 [ Ссылка ], 🤖 : [ Ссылка ] 📱
⬇︎⬇︎ 🔥 🔧🔧🔧 🔥⬇︎⬇︎

🛠📏⚙ FIND ALL THE PARTS AND TOOLS NEEDED AND RECOMMENDED BY USETOOL EN ⚙📏🛠

Needed parts:
- Suspension strut support bearing : [ Ссылка ]

- Shock absorber : [ Ссылка ]

- Penetrating oil : [ Ссылка ]

- Spring

- Copper grease : [ Ссылка ]

💪 TIGHTENING TORQUES FOR FRONT SHOCK ABSORBERS VOLKSWAGEN Golf mk6
- Strut support bearing retaining bolts : 15 Nm + 90°
- Shock absorber head nut : 60 Nm
- Shock absorber base holding bolt : 70 Nm + 180°
- Hub nut : 70 Nm + 90°
- Sway bar link ball joint nut : 65 Nm
- Control arm ball joint holding nuts : 100 Nm
- Outer tie rod holding nut : 20 Nm + 90°

Discover a vast array of services that will help you run the maintenance of your car: vehicle user manuals, maintenance planning and mechanics-oriented tutorials!
Front shock absorbers on a Volkswagen Golf mk6 .

Discover the world of UseTool EN

Needed tools:
-💣🤖🏆The complete toolbox recommended by UseTool EN to repair your Golf mk6 : [ Ссылка ] 🏆🤖💣

- 22mm Offset wrench
- Socket wrench
- Wheel lug wrench
- 10mm socket
- 13mm socket
- 16mm socket
- 18mm socket
- Hammer
- Wire brush
- Crowbar
- Impact wrench
- 6mm Allen key
- Chisel
- M14 Triple square socket
- M24 Triple square socket
- Sandpaper
- Torque wrench: [ Ссылка ], [ Ссылка ], [ Ссылка ]
- Spring compressor: [ Ссылка ]
- Shock absorber head removal kit: [ Ссылка ]

🔝💪Safely lift your Golf mk6 with the hydraulic jack: [ Ссылка ] and axle stands: [ Ссылка ] recommended by UseTool EN 💪🔝

- Hydraulic jack
- Wooden peg
- Axle stand

🚗📢💡 RESOURCES 💡📢🚗

Usetool's warnings
- We advise never replacing just one shock absorber, to make sure you drive we the most balanced vehicle possible.

- Be careful during the spring compression stage, it may be risky and requires careful attention. Fix the tool in a vice, this will make it easier to use.

Usetool's info
- During this operation, you will work on the steering system of your car.

- When you change the shock absorbers in your vehicle, you should carry out a tyre alignment.

📽❤️🚨 USEFUL VIDEOS 🚨❤️📽
- [ USETOOL'S TIPS & TRICKS ] Lifting your vehicle safely : [ Ссылка ]

- [ USETOOL'S TIPS & TRICKS ] Removing and reinstalling a wheel : [ Ссылка ]

- [ USETOOL'S TIPS & TRICKS ] How to (PROPERLY) use a torque wrench? 🔧 : [ Ссылка ]

- How to replace the sway bar links Golf mk6 🚗 : [ Ссылка ]

Space Race by tubebackr | [ Ссылка ]
Music promoted by [ Ссылка ]

Terms and conditions of the offer : [ Ссылка ]

Disclaimer: This video was created for information purposes and does not guarantee the outcome of actions undertaken.
To ensure that you see the best results, we recommend getting in contact with qualified technicians who will carry out the installation.
This video provides tips and recommendations that can be useful when repairing or changing parts. MCD12 and its partners cannot be held responsible for any physical and material damage that comes from the poor installation or incorrect interpretation of the video content.
This video was created for information purposes and does not guarantee any outcomes. The user is solely responsible for the incorrect use of repair machines, tools and parts, in particular if these may cause physical damage. MCD12 and its partners recommend taking great care and carefully following the safety rules when carrying out the repair or replacement of any parts. Please keep in mind that using poor quality parts compromises the safety of the driver when on the road.

0:00 Intro
0:15 Remove the shock absorber
4:23 Set the new shock absorber up
7:15 Replace the shock absorber

свернуть