For many watch enthusiasts, one of the first things we do when purchasing a new Seiko timepiece is to adjust the length of the watch bracelet to achieve a comfortable fit. While basic perfunctory shortening tools can work in general, they may harm your watch. This video will showcase the advanced method of shortening Seiko watch bands.
Once you learn this technique, you'll gain a thorough understanding of how almost any metal watch band is assembled. So why settle for less when, with a few extra tools, your Seiko's bracelet can be treated with the precision it deserves?
Today, we'll use the Seiko King Turtle Prospex SRPE03K1 as an example to walk through the step-by-step process. This Seiko watch has a pin and collar system to connect the links of the watch band, while not all Seiko watch bands use the same connection system. We'll guide you through each step, beginning with choosing the necessary tools. This will result in a bespoke fit that is second to none.
Whether you're looking to customize a fresh purchase or breathe new life into a beloved timepiece, learning Seiko's advanced shortening method is sure to bring your mechanical pieces to the next level. Consider this your invitation to better understand and care for your Seiko metal watch band.
By following along, you'll soon appreciate the brilliance behind Seiko watch band designs while achieving optimal comfort and style. Let's get started with the tutorial!
How to loosen the Seiko watch band links
0:00 Intro
0:17 1. Uninstall from the band from the clasp
Uninstall one end of the buckle from the Seiko watch band with a spring bar tool.
0:29 2. Check how many excess links must be removed
Place the band along your wrist to determine how many excess links must be removed. Remember always allow the longer side to be attached to the 12 o'clock side as it will attach to the side of the micro adjustment of the clasp with the fine-tuned holes.
0:38 3. Check which links have arrows
Check which links have arrow marks on the back side, indicating they can be removed. Place the watch band in a Bracelet Holding Block with the arrows facing down.
0:48 4. Use a push-pin tool and hammer
Use a push-pin tool and hammer to push the pin out of the link being removed. Allow the pin and collar to be released completely.
1:07 5. The pin and collar as the connection parts
All unwanted links have been removed, you can see the pin and collar as the connection parts of the Seiko watch band in this section.
Re-assemble the Seiko watch band
1:14 6. To re-assemble the band
Flip the link back over so that this time the arrows are facing up. To re-assemble the band, make sure the holes of the separated loose links are aligned.
1:24 7. Insert the pin and collar back into the hole
First, insert the pin into the hole, next insert the collar in an upside-down direction. (Remarks: Bend the pins slightly if they go in too easily to provide tension and hold them in place.)
1:38 8. Hold the collar in place
Use tape to hold the collar in place to prevent it from falling out.
1:48 9. Use hammer and push-pin tool once again
Put the band back into the Bracelet Holding Block, and place the push-pin tool on the end of the pin inside the band. While holding in the block, gently tap the pin with a hammer to begin seating.
2:03 10. Fully seat the pin and collar
Continue tapping or use a push-pin tool to fully seat the pin and collar. Should you need to direct use of a hammer, make sure you've changed to a plastic head to avoid any scratches that may be caused.
2:24 11. Fine-tune the length with micro-adjustment on the clasp
The final step is to install the band back into the clasp; you can use the micro-adjustment on the clasp to finely adjust the length if needed.
Shop 'Watch Band Tools' by showing the sequence below from the video
1. Elegant Spring Bar Watch Band Tool for changing watch straps
2. Bracelet Holding Block Standard Slots, Black
3. Micro Hammer For Removing Watch Band Pins
4. Punch Pins - Watch Band Pin Remover
- THANKS FOR WATCHING –
Follow us:
Facebook: [ Ссылка ]
Instagram: [ Ссылка ]
WordPress blog: [ Ссылка ]
![](https://s2.save4k.ru/pic/zQ4SErUDW54/maxresdefault.jpg)