Here is a straight forward bathtub reglazing job. No major repairs.
I start off by sanding / cleaning with a 100 grit wet sanding block to remove any loose dirt and soap scum. Then I dry it off with some paper towel before sanding again with 120 grit dry sand paper to scuff up the surface to prepare for primer. Once I wipe it down and tack cloth it we start taping and masking off the bathtub to get ready to start sparying the primer before refinishing with the top coat. I spray two coats of Resurface solutions Euro Epoxy Primer and then two coats of Resurface Solutions ISO FREE Gloss White Top Coat. Hope you enjoy...feel free to ask any questions in my DM on instagram or here in the comments.
FOLLOW ME ON INSTAGRAM: [ Ссылка ]
Products Used in Videos on this Channel:
Material Used:
Titan Capspray Compresson and Spray Gun: [ Ссылка ]
Bondo Fiberglass Resin: [ Ссылка ]
Bondo Fiberglass Mat: [ Ссылка ]
Bondo Glass Short Strand: [ Ссылка ]
Ryobi Corded Drill: [ Ссылка ]
HDX Mixing Cup 32oz: [ Ссылка ]
2" Paint Brush 24pk: [ Ссылка ]
120 To 3000 Assorted Grit Sandpaper for Wood Furniture Finishing, Metal Sanding and Automotive Polishing, Dry or Wet Sanding, 9 x 3.6 Inch, 36-Sheet: [ Ссылка ]
Bondo Spreader Pack: [ Ссылка ]
Bondo All-Purpose Putty: [ Ссылка ]
Zinsser 1-2-3 Primer: [ Ссылка ]
Krylon Alternative: Rustoleum Tub and Tile White: [ Ссылка ]
Caulking DAP Stretch: [ Ссылка ]
Napco Extra Strong Acid Etch: [ Ссылка ]
Jasco Paint and Epoxy Remover: [ Ссылка ]
Loctite Foam Gap Filler: [ Ссылка ]
Capspray Titan Compressor 75 / 95:
Titan 0524041 or 524041 Capspray Maxum II HVLP Spray Gun with Free Check Valve Kit 0297051: [ Ссылка ]
3M Half Mask Reusable: [ Ссылка ]
3M N95 Respirator Filter 10pk: [ Ссылка ]
3M Cartridge Replacement Pack: [ Ссылка ]
Fume Exhauster 8" Duct Tubing: [ Ссылка ]
Portable Ventilation Exhaust Fan here: [ Ссылка ]
Tack Cloth: [ Ссылка ]
Rustoleum Appliance Spray White: [ Ссылка ]
