Ready to take your WLED projects beyond the basics? This video dives into the world of adding additional components to your WLED controller to unlock new project possibilities.
I'll guide you through adding components such as push buttons, switches, PIR sensors, microphones, IR remote controls, dimmer/speed controls, and relays. I'll cover the wiring diagrams and how to configure the components in WLED... all with no code or custom compiling!
This will be based on the current production release of WLED (0.14.1 as of this recording) using an ESP32. Note that I won't be covering additional components that can be added via custom user mods or other forks of WLED. Most components (except microphones/audio reactivity) can also be used with an ESP8266.
For a written guide that contains wiring diagrams and the WLED configuration steps, please see: [ Ссылка ]
Chapter Links:
=============
00:00 Intro
01:32 Standard WLED Controller Used
04:01 Pushbuttons
07:40 Custom Action Presets
09:24 Applying Custom Actions
11:19 Toggle Switches
14:15 Motion Sensors
17:43 Other Binary Sensors
18:50 Potentiometers (analog buttons)
22:18 IR Receivers and Remotes
26:50 Microphones and Audio Reactivity
28:20 Analog Microphone (MAX9814)
31:42 Digital Microphone (INMP441)
33:53 Relays
40:19 Using Multiple Devices (Franken-Controller)
42:48 Other Options and Ideas
Parts Shown or Used:
===================
ESP32 VROOM-32 30-pin: [ Ссылка ]
ESP32 VROOM-32 38-pin narrow (breadboard friendly): [ Ссылка ]
Logic Level Shifter: [ Ссылка ]
WS2812b LEDs: [ Ссылка ]
Normally Open Pushbutton: [ Ссылка ]
Toggle Switch: [ Ссылка ]
AM312 PIR Motion Sensor: [ Ссылка ]
HC-SR501 Motion Sensor: [ Ссылка ]
RCWL-0516 Radar Motion Sensor: [ Ссылка ]
PhotoResistor Module (digital out): [ Ссылка ]
20 kΩ Potentiometer: [ Ссылка ]
IR Receiver: [ Ссылка ]
IR 44-key Remote: [ Ссылка ]
MAX9814 Analog Mic: [ Ссылка ]
INMP441 Digital Mic: [ Ссылка ]
3V/3.3V Relay: [ Ссылка ]
DC-DC Buck Converter: [ Ссылка ]
5V 10A Power Supply: [ Ссылка ]
Dupont Jumpers: [ Ссылка ]
Breadboard Jumpers: [ Ссылка ]
ProtoBoard: [ Ссылка ]
ElectroCookie Board: [ Ссылка ]
Aluminum LED Channel with Diffuser: [ Ссылка ]
Some of these links may be Amazon affiliate links. Use of these links will not affect your pricing, but as an affiliate this channel may earn a small commission if you make a purchase.
Additional Links and Information:
================================
Written Guide for this Project: [ Ссылка ]
Official WLED Website: [ Ссылка ]
WLED Web Installer: [ Ссылка ]
Random Nerd Tutorials Which GPIO pins to use -
ESP8266: [ Ссылка ]
ESP32: [ Ссылка ]
If you'd like to help support this channel, or just say thanks, you can consider buying me a cup of coffee:
[ Ссылка ]
#wled #esp32 #esp8266
![](https://i.ytimg.com/vi/1Qj1jJAam-8/maxresdefault.jpg)