Hello everyone, welcome to this video. This video is the Updated version of how to install macOS on supported PC. In this video we are going to setup EFI and making the macOS Installer.

Links:
Opencore Install Guide - [ Ссылка ]
Propertree - [ Ссылка ]
GenSMBIOS - [ Ссылка ]
Python latest version - [ Ссылка ] | Can also be installed in Microsoft Store
Intel Desktop Config.plist - [ Ссылка ]

Part 2 - [ Ссылка ]

In part 2, instead of using Opencore Auxiliary tools which can mess up sometimes the config.plist, use Propertree and do OC Snapshot after adding drivers/tools/kexts. To mount the EFI use MountEFI or ESP Mounter Pro (MountEFI recommended) to mount it.


As said in the video Here is the BIOS Settings you need to change:
First of all, optimize BIOS settings/reset BIOS settings
Second of all, change the BIOS settings, according to OpenCore:

DISABLE
Fast Boot
Secure Boot
Serial/COM Port
Parallel Port
VT-d (can be enabled if you set DisableIoMapper to YES)
Compatibility Support Module (CSM) (Must be off in most cases, GPU errors/stalls like gIO are common when this option is enabled)
Thunderbolt (For initial install, as Thunderbolt can cause issues if not setup correctly)
Intel SGX
Intel Platform Trust
CFG Lock (MSR 0xE2 write protection)(This must be off, if you can't find the option then enable AppleXcpmCfgLock under Kernel and then Quirks. Your hack will not boot with CFG-Lock enabled)

ENABLE
VT-x
Above 4G Decoding
2020+ BIOS Notes: When enabling Above4G, Resizable BAR Support may become an available on some Z490 and newer motherboards. Please ensure that Booter - Quirks - ResizeAppleGpuBars is set to 0 if this is enabled.
Hyper-Threading
Execute Disable Bit
EHCI/XHCI Hand-off
OS type: Windows 8.1/10 UEFI Mode (some motherboards may require "Other OS" instead)
DVMT Pre-Allocated(iGPU Memory): 64MB or higher
SATA Mode: AHCI


Hope you enjoyed this video, this video is saved in Hackintosh Playlist so that you can access easily though.
The part 2 - Post Install is also saved in Hackintosh Playlist.


This video is for people that understand basics of the hardware, knows the basics of command line tools, very careful of what you doing and knowing what you doing.

#hackintosh #pc #bootloader #opencore #apple

свернуть