How to use vacuum drying oven?
Step 1:Connect the drying oven to power supply.
Step 2:Connect to vacuum pump pipe.
Step 3:Adjust pressure relief valve,the vent shall be adjusted more than 90 °
Step 4:Switch on the vacuum valve and vacuum pump,the vacuum pump starts to work,we can hear the noise of the vacuum pump.
Step 5:Wait until the pressure down(We can pay attention to the pressure gauge),then switch off the vacuum pump and vacuum valve.Now the interior of the vacuum drying oven is in a vacuum state or similar to vacuum state.
Step 6:Switch on the temperature control.
Step 7:Press Set key once,it displays SP,it mean in setting mode.
Step 8:Press Up key to set the temperature up and Down key to set the temperature down.Long press the Up key or Key to set up or down the temperature continuously.We can also press Shift key to move the digital position.
Step 9:Press Set key again to run the setting parameters.
Question:If the vacuum drying oven is not purchased from our factory,does the video work?
We can take most parts for reference if it is not purchased from us.
The whole procedure of operating the machines is divided into 2 parts:1.we make the working chamber in a vacuum state.2.We control the temperature.
For the first part,we can fully take for reference.If your own control panel is similar to our control panel,actually most are,of course the 2 part can also be taken for reference.
For the whole operation details,welcome to visit our website: [ Ссылка ]
