🇺🇸 Hi folks 👋🏻🤠
Thank you for watching this video and don't forget to subscribe so you don't miss anything (it's free but it helps content creators a lot) 🙏🏻🥰
If you want to help me to expand my squadron 😜 or buy a specific plane to review, you can help me by making a small donation via my PayPal link [ Ссылка ]
Thank you very much in advance my friends 🤩🙏🏻
🇫🇷 Salut les copains 👋🏻🤠
Merci d’avoir regardé cette vidéo et n’oubliez pas de vous abonner pour ne rien manquer (c’est gratuit et pourtant ça aide énormément les créateurs de contenus) 🙏🏻🥰
Si vous voulez m’aider à agrandir mon escadron 😜 ou que j’achète un avion en particulier, vous pouvez m’aider en faisant un petit don via mon lien PayPal [ Ссылка ]
Merci beaucoup beaucoup d’avance les amis 🤩🙏🏻
📸 Follow me on Instagram : [ Ссылка ]
⏰ TikTok : [ Ссылка ]
You can buy my things here ⬇️
🎮 Jeti Rx and DS16 ➡️ [ Ссылка ] @OpaleParamodels
🔋CNHL LiPo ➡️ [ Ссылка ]
✈️ Jets and more ➡️ [ Ссылка ]
🌬️🍃 FMS 2500mm ASW-17 Glider PNP
If efficiency, stability and aerobatic capabilities are what you seek in a glider, look no further than the FMS 2500mm ASW-17!
🇺🇸 Buy FMS planes (for USA customers) ➡️ [ Ссылка ]
🇪🇺 FMS European Dealers (revendeurs FMS Europe) :
FR + BE + NL + LU ➡️ [ Ссылка ]
DE + CH + AT ➡️ [ Ссылка ]
Specifications :
* Motor Predator 3541-750KV and ESC 40 A
* Snap together assembly, no glue necessary
* 2 pieces wing
* Functional flaps
* Folding high efficiency prop 13.5x6’’
* Made of highly durable EPO
* Wingtip + tail skids
* Plastic wing leading edges
* Wingspan: 2500 mm (98.4")
* Length : 1390 mm (54.7")
* Flying weight : 2390g with CNHL 4S 2200 40C (256g)
* Wing load (Charge alaire) : 47,5 g/dm2
* Wing area (Surface alaire) : 50,3 dm2
* Digital metal Servos : 4x 17 g + 2x 9 g
* LiPo 4S 14,8V 2200-2600 mAh 35C
* JETI REX7 receiver to have a flight mode full span (ailerons to flaps mix) but no gyro at all!
❌ CG 80mm (see LiPo photo)
📏 Rates (my low / book’s low / my high) :
- Aileron 10/12/30mm
- Elevator 7/10/10mm
- Rudder 20mm
- Flaps (thermal) on a slider : 3/5mm (down 0.5mm elevator compensation)
- Butterfly on a slider : flaps -45mm, ailerons +14mm, elevator -5mm
- Speed mode with 10% offset down elevator
- Thermal mode with 1mm down flaps
⏰ Flights with timers and voltage (checked few minutes after landing):
-1st CG 80mm : CNHL 4S 2200 40C : 20m flight (4m50 motor) 3.78v
-2nd CG 80mm : CNHL 4S 2200 40C : 16m flight (3m10 motor) 3.89v
-3rd CG 80mm : CNHL 4S 2200 40C : 25m flight (3m10 motor) 3.89v
-4th aerobatics CG 80mm : CNHL 4S 2200 40C : 15m flight (3m44 motor) 3.86v
-5th CG80mm : CNHL 4S 2200 40C : 21m flight (2m45) 3.95v
0:00 Présentation française
0:40 English presentation
1:45 The box
2:28 UNBOXING
3:23 Wings review
5:35 Fuselage
6:49 Rudder assembly
7:17 Horizontal stab Assembly
8:09 Specifications
8:31 Wing spars assembly
9:00 Open canopy / servos wires
10:03 Linkage for tail servos
10:23 Rx installation
12:26 ESC Calibration
14:45 Center Tail Servos
19:35 Assembly Wings
20:27 CG 80mm / LiPo placement
24:34 My Rates
24:44 2400gr weight
25:05 Please Subscribe 🙏🏻😍
25:36 Photos
#glider #rcplane #fms #asw17 #jeti #opale #radiocontrol #setup #modellbau #eflite #new #hsdjets #perfect #foam #crash #freewing #unboxing #assembly
Ещё видео!