PRODUCT DESCRIPTION
MAX EPC A/B is a room temperature cured epoxy-based electronic potting compound designed for large mass encapsulation of printed circuit boards.
It produces low exothermic heat suitable for large mass or thick cross-sections potting and casting applications. Upon cure, MAX EPC creates a permanent barrier against ambient air, corrosive environments, moisture, and direct physical contact with the circuitry.
MAX EPC demonstrates excellent dimensional stability with minimal thermal expansion and contraction.
MAX EPC can be poured up to 4-inch thick sections and will not generate high exothermic heat during cure.
It cures very hard after 36 hours at 25°C (77°F) or can be heat cured for faster cure times.
MAX EPC A/B offers high thermal conductivity that dissipates heat away from the circuitry, preventing 'hot spots that can cause component failure or reduced life span of the encapsulated electronic circuit.
MAX EPC A/B bonds to metals, FRP, ABS, PVC, Plastisol, and other substrates commonly used in wire jackets, circuit boards, and electrical enclosures.
MAX EPC A/B yields low shrinkage and excellent dimensional stability that prevents 'component pull-outs caused by expansion and contraction coefficients when exposed to varying temperatures. Its service temperature ranges from -40°C to 100°C (-40°F to 212°F).
MAX EPC A/B is mixed 4:1 by weight; it provides a 90-minute working time for volumes of 4 cubic inches and up to 45 minutes for larger mass -6 cubic inches. Its mixed viscosity is 2100 cPs at 25°C, similar to the consistency of corn syrup or honey, and easily poured in place.
It is self-leveling and designed to release air bubbles and cure with minimal voids and porosity.
Upon cure, MAX EPC A/B permanently encapsulates the circuitry in an electrically non-conductive resin matrix that prevents direct contact with the electronics. It is entirely waterproof and is suitable for continuous water immersion or ground buried potting applications.
Available for purchase at;
40 Fluid Ounce Kit
eBay Marketplace
[ Ссылка ]
Amazon
[ Ссылка ]
80 Fluid Ounce Kit
eBay Marketplace
[ Ссылка ]
Amazon Market Place
[ Ссылка ]
Or Call 877 403 8008 Mon to Fri 9 am to 4 pm, PST to place your order directly and save 5%
