Repurposed plate made into broken china jewelry by soldering #diyjewelry #jewelry #repurposing #art
SUBSCRIBE FOR MORE CRAFT VIDEOS!
Here is my subscribe link:🌹💖😍
[ Ссылка ]
Soldering for crafts Stained glass #jewelry #design #craftideas #art #diycraft #dichroicglass
Similar DIY video link:
[ Ссылка ]
This is video is a tutorial step-by-step on how to make repurposed used plate and how I made them into broken china glass earrings. I used a used plate from Amazon, and lead-free solder. I scored the glass with a glass pistol grip glass cutter and then chopped the glass with a chopper tool for glass (link below), and then I use my Inland grinder to smooth out the edges.
After that, I clean the glass with glass cleaner so that the copper foil will stick to the glass. I wrap each piece with the copper foil and use a burnishing tool to burnish the foil onto the glass.
Lastly, I solder the foil onto the glass and also attach the jump ring using a third hand and place the open end of the jump ring flush to the glass to have a secure hold. I solder both sides of the jump ring for a long-lasting result.
After you polish the glass with a glass finishing compound after cleaning one last time.
Then I used a finishing compound.
WARNING: If you decide to make stained-glass earrings, you must use Lead-Free solder!
Here is my Etsy store link:
[ Ссылка ]
LINK TO MY FIRST STAINED GLASS JEWELRY TUTORIAL:
[ Ссылка ]
LINK TO MY VIDEO ON HOW TO CUT GLASS BY HAND:
[ Ссылка ]
As an Amazon Associate, I do earn from qualifying purchases, and this means if you click on the link and purchase the item, I will receive an affiliate commission at no extra cost to you. I’ll earn some coffee money which I promise to be enjoying while I make more blissful content like this.
Items listed used:
GLASS FINISHING COMPOUND FOR WHEN FINISHED: [ Ссылка ]
Plate used: (I used the used plate option)
[ Ссылка ]
SMOKE EXTRACTOR - [ Ссылка ]
LEAD-FREE SOLDER LINK: [ Ссылка ]
SOLDERING IRON I USE LINK: [ Ссылка ]
STRAIGHT LINE/ANGLE GLASS CUTTING SYSTEM I USED LINK: (highly recommend) [ Ссылка ] (small one)
[ Ссылка ] (larger one, I use the small one but just in case)
GLASS GRINDER (highly recommended): [ Ссылка ]
STAINED GLASS FLUX: [ Ссылка ]
SOLDERING MAT: [ Ссылка ]
GLASS RUNNERS/GLASS CUTTING PLIER KIT:
[ Ссылка ]
HIGH HEAT SPONGE FOR SOLDERING: [ Ссылка ]
THIRD-HAND TOOL: [ Ссылка ]
3/16 copper foil: [ Ссылка ]
13/64 black back copper foil: [ Ссылка ]
COPPER FOIL DISPENSER TRAY (helps so much for foiling the glass, plus it keeps it organized): [ Ссылка ]
(I find this extra helpful!)
BURNISHING TOOL FOR COPPER FOIL: (super helpful!): [ Ссылка ]
PLIERS FOR JUMP RING: [ Ссылка ]
pistol grip oil feed glass cutter: [ Ссылка ]
Here are the steps for creating stained glass jewelry using lead-free solder and dichroic glass:
Step 1: Gathering Materials
Collect all the necessary materials, including glass pieces, lead-free solder, flux, soldering iron, glass cutter, grinder, safety goggles, and a soldering stand.
Step 2: Designing Your Jewelry
Plan your jewelry design on paper or create a template to follow.
Step 3: Cutting Dichroic Glass
Using a glass cutter, carefully cut the glass pieces according to your design. Take your time and ensure precise cuts.
Step 4: Grinding and Shaping
Smooth the edges of the cut glass pieces using a grinder. This step ensures that the edges are safe and smooth to handle.
Step 5: Applying Flux
Apply a small amount of flux to the edges of the glass pieces. Flux helps the solder adhere to the glass.
Step 6: Soldering
Place the glass pieces together on a soldering stand in the desired design. Use the soldering iron to melt lead-free solder along the edges.
Step 7: Cleaning
Once the solder has cooled and solidified, clean your stained glass jewelry using a soft cloth and glass cleaner to remove any residue or flux.
Step 8: Adding Jewelry Findings
Attach jewelry findings, such as jump rings or earring hooks, to your stained glass creations, making them ready to be worn.
Step 9: Final Touches
Inspect your jewelry for any rough edges or imperfections, and do any necessary touch-ups with the soldering iron or grinder.
Step 10: Display and Enjoy
Display your beautifully crafted stained glass jewelry, and proudly wear or share it with others to enjoy your artistic creation!
Ещё видео!