How do you perform required maintenance on a New Tech Machinery roof panel machine like the SSQ II™ MultiPro?
**********************************
Regular maintenance for your portable roof panel machine will help prolong its life, ensure your metal panels are the highest quality possible, and allow your operators to work safely. In this video, Nate Roston and Chuck Burch from the New Tech Machinery Service department review the maintenance products required and demonstrate how to perform some of the most common and important maintenance steps such as lubricating the shear, tightening the chains, and cleaning the drive rollers. If by chance we didn't answer your question in this video, you can contact us here: [ Ссылка ]
Topics covered:
►Intro 00:00
►Shear lubrication 1:09
►Lockout/tagout 1:43
►Acme shaft lubrication 1:54
►Rib roller lubrication 2:32
►Entry guide lubrication 3:00
►Cutting fluid for notching 3:50
►Grease 4:22
►Super Lube Gel 6:21
►Drive gear lubrication 6:57
►Chain tightening and lubrication 7:24
►Cleaning polyurethane drive rollers 8:59
►Cleaning stainless steel forming rollers 9:38
►Hydraulic fluid check 10:29
Lubricate the chains a minimum of every 40 hours of operation. Lubricate the main drive gears a minimum of every 30 hours of operation. Lubricate the shear a minimum of once every 30 cuts. Refer to your owner's manual for maintenance schedules and procedures.
Read about roof panel machine maintenance here: [ Ссылка ]
Read about seamless gutter machine maintenance here: [ Ссылка ]
**********************************
FOLLOW THE NEW TECH MACHINERY TEAM
►[ Ссылка ]
►[ Ссылка ]
Visit Our Website: [ Ссылка ]
Subscribe To Our Blog: [ Ссылка ]
Machine should never be operated without the guards in place. Otherwise severe injury can occur. Machine must be operated by a competent trained individual and never be operated by a person who has not had proper training, studied the video and the latest operating manual found at www.newtechmachinery.com/resources/machine-manuals. Failure to operate correctly or without guards can result in severe injury.
New Tech Machinery provides no warranty (finish, substrate or weather tight) in relation to the metal roofing systems the machines form. Should a warranty be required, users should consult with the metal roof manufacturer or coil supplier prior to contracting on work. It is the sole responsibility of the installer and/or metal panel manufacturer to ensure that the roof system meets all engineering and local building codes.
![](https://i.ytimg.com/vi/NyRILA1YLqY/maxresdefault.jpg)