#geprc #cinelog35 #newarrivals #cinewhoop
Gathering the experience and evolution of the GEPRC team in all aspects, CineLog35 V2 is finally launched to the market with better performance.
CineLog35 v2 version integrated with O3 VTX. The CineLog35 V2 version of the main carbon plate and injection protection frame increased the 7075 aluminum column for structural strengthening.
The battery mounting method uses a tie with 7075 aluminum parts fixed. The power XT60E1-M plug is integrated with the carbon plate for convenient application. The protective frame for O3 Air Unit adds a memory card and USB port for easy data reading.
Equipped with F722-45A AIO and the new SPEEDX2 2105.5 motor, more power, with aggressive power system and faster response.
This is a 3.5-inch HD FPV cinematic FPV drone that integrates cinematic, freestyle, leisure, and safety to meet the user’s requirements for flying and filming various scenes indoors and outdoors. The user’s satisfied voice is the motivation for us to move forward.
Feature:
1. New appearance design, strengthening carbon plate, hollow design, injection protection frame, noise reduction design, flight safety, silent.
2. Adopts the GEP F722-45A AIO V2 high performance flight controller.
Propeller Guard adds memory card and USB ports to O3 Air Unit for easy data reading
3. For O3 camera design independent under hanging shock absorption gimbal, to solve the camera IMU resonance issues, to achieve the optimal anti-shake effect.
4. SPEEDX2 2105.5 motor with HQ DT90 propeller, stable power output, and smooth flight feel.
5. Power cable using XT60E1-M plug and carbon plate integrated design, convenient application.
6. Battery installation method using a tie with 7075 aluminum parts fixed, solid and stable.
7. Carefully tuned 3.5-inch HD cinematic FPV with flexible and delicate flight feeling.
Specifications:
Model: Cinelog35 V2 HD O3
Frame: GEP-CL35 V2
Wheelbase: 142mm
Gimbal plate: 2.0mm
Top plate: 3.5mm
Bottom plate: 1.5mm
FC system:GEP-F722-45A AIO V2
MCU: STM32F722RET6
Gyro: ICM 42688-P
OSD: Betaflight OSD w/AT7456E chip
ESC: 8Bit 45A
VTX: O3 Air Unit
Camera: O3
Antenna: 5.8G&2.4G
Motor: SPEEDX2 2105.5-2150KV（6S）
Propeller: HQProp D-T90MM
CineLog35 V2 HD O3 TBSNanoRX weight: 285.8g
Receiver: PNP, GEPRC ELRS 2.4G, TBS Nano RX
Recommended battery: LiPo 1050mah-1300mah
Flight time: 5′00″ -8′ 30″
Click here to learn more:
√HD O3: [ Ссылка ]
√HD Wasp: [ Ссылка ]
√HD Avatar: [ Ссылка ]
√Analog: [ Ссылка ]
For more from GEPRC, please follow@geprc
Follow us on:
Instagram: [ Ссылка ]
Facebook: [ Ссылка ]
Facebook Group:[ Ссылка ]
