Hi all,
Sharing with you my first outdoor flight with my Eachine UZ65.
This 65mm TinyWhoop is special, as i has 35mm props (vs standard 31mm).
To do this, it uses a slightly smaller flight controller form factor.
I upgraded it to BT2.0 connector.
Also, i installed JESC2.3 48Khz, and updated to BF4.1.7
And, i modified the PID tuning from BF defaults.
Last, i added a drop of plastidip liquid tape on the VTX's UFL connector, so that i can't lose the antenna in a crash.
That's the UZ65 the way it should be, according to me :-)
The only problem is the RX range. I plan to upgrade the antenna, hoping it will fix.
The cam is lightweight, but not great picture quality.
About the frame, it is decently resistent, but not as much as best frame you could find on 31mm props standard.
Please find below details & links to item used ( note : some are affilate )
Feel free to ask any question in the comments section
You can also follow me on Instagram : [ Ссылка ]
You can support me by using affiliate links below.
Thanks for watching !!!
Music credits : Jose Amnesia vs. Serp - Second Day
The Eachine UZ65 : [ Ссылка ]
BT2.0 connectors : [ Ссылка ]
or [ Ссылка ]
My tuning changes (over bf4.1.7 defaults) :
BiDir DSHOT : 12 poles
4k/4k/DSHOT300
PD Balance : 1.6
P and D Gain : 1.6
Gyro Filter Multiplier:1.7
D Term Filter Multiplier:1.7
Dynamic Notch Filter Range : LOW
Dynamic Notch Width Percent : 0
Dynamic Notch Notch Q : 200
Dynamic Notch Min Hz : 90
Other stuff used in the making of this video :
Goggles : FatShark HDO + RapidFire
[ Ссылка ]
[ Ссылка ]
5.8G Antenna :
FatShark Immersion RC SpiroNet 5.8G -- [ Ссылка ]
AOMWay
Aomway 5.8G 13dbi Diamond Directional Antenna -- [ Ссылка ]
My homemade 50/60fps high bitrate DVR :
[ Ссылка ]
Remote controler used : modded Taranis X9D+
More details here : [ Ссылка ]
![](https://i.ytimg.com/vi/X9_JRsQ-9PI/mqdefault.jpg)