Inflate and deflate your NeoAir® sleeping pad with ease with this lightweight sleeping pad pump. Learn More about the NeoAir Micro Pump: [ Ссылка ]
Designed to work with Therm-a-Rest’s WingLock and TwinLock valves, the pump might just become your best friend at the end of a long day in the backcountry.
Instructions:
Inflation
1. Install 2 AAA batteries
2. Open your WingLock valve or TwinLock “IN” valve.
3. Connect the “Inflation” side of the pump to the valve. You will hear an audible snap when the pump is properly seated.
4. Slide the switch to the “on” position.
5. Allow the pad to reach your desired level of support before closing the valve and switching the pump to the “off” position.
Deflation (WingLock only)
1. Twist the wings and open the valve cap to deflate.
2. Connect the “Deflation” side of the pump to the valve. You will hear an audible snap when the pump is properly seated.
3. Slide the switch to the “on” position.
4. Allow the pump to completely deflate the pad before closing the valve and switching the pump to the “off” position.
Shop the NeoAir Micro Pump now at thermarest.com
See you out there!
