#DJIInspire3 #inspire3 #inspire #dji #drone #cinematography #floridadronesupply
First things first let make sure your remote and batteries are fully charged and ready to go.
The inspire 3 included an impressive charging dock that fits perfectly within the case so that it's never left behind, so before you decide to take flight make sure you give your batteries some time to charge up.
The intelligent batteries and remote controller internal battery require activation before first use. The remote controller cannot be powered on before the internal battery is activated.
Insert the intelligent batteries into the charging hub by folding down the side panels revealing the battery slots which can hold a total of 8 batteries.
The RC Plus remote is already linked to the aircraft when it is purchased together as part of a combo. The remote does require activation before first use, and a solid internet connection is required for activation. Press and then press and hold the power button to power on the remote controller. Follow the on-screen prompts to activate the remote controller.
While your batteries are charging this would be a good time to go ahead and install your propellers. The Inspire 3 uses four propellers, since 6 come with your kit, set 2 aside for later.
After aligning the propeller and motor installation mark, respectively insert the four propellers into the motors and then press and rotate to lock.
Make sure the quick-release propeller adapter is rotated to install in place, and that the propeller adapter springs back with the top of the motor shaft.
Once your batteries are charged you can go ahead and insert the 2 needed batteries into the drone.
Remove the protective covers from the aircraft battery compartment after inserting make sure the batteries are mounted firmly.
Next click the power button 5 times to enable the landing gear, which will raise the drone up so that you can now install the all new Zenmuse X9-8k Air Camera with the lens of your choosing
The X9 camera is compatible with a variety of different lenses, so you can choose the one that best suits your needs.
At this point insert the DJI PROSSD into the aircraft. The indicator light on the DJIProSSD should turn on indicating that it is correctly inserted.
Once you have the lens attached, Go ahead and power on your remote.
The inspire 3 requires activation before first use. After powering on the aircraft and the remote , follow the on screen prompts to activate the aircraft using DJI Pilot 2. Make sure you have a good internet connection for this process. There may also be a firmware update when you get everything powered up and activated and we do recommend that you do this whenever you are prompted to do so. This will ensure you are getting the best user experience possible.
Once you're able to enter the camera view your aircraft is officially ready to take flight. Next video will be our official test flight so stay tuned and feel free to leave a comment below, and make sure to subscribe to our channel.
To Purchase The Inspire 3, Click here: [ Ссылка ]
=====
About Florida Drone Supply:
Florida Drone Supply is your leading source for DJI, Parrot, and Autel & Teledyne Drone Systems. We proudly serve drone enthusiasts, hobbyist's, drone professionals, various public safety, police departments, fire departments and other forms of state, local, & federal government customers. Give us a call today or stop by our Fort Myers, Florida location.
=====
Contact Florida Drone Supply:
📞 1-888-537-6637
Info@FloridaDroneSupply.com
www.FloridaDroneSupply.com
=====
🏢
Visit Florida Drone Supply:
16335 S. Tamiami Trail
Fort Myers, FL 33908
=====
Connect with Florida Drone Supply
➡️IG: www.instagram.com/floridadronesupply
➡️FB:www.facebook.com/floridadronesupply
➡️T: www.twitter.com/fldronesupply
=====
Brands We Carry:
DJI, DJI Enterprise, Autel, Teledyne FLIR, TEAL, Parrot, Hoodman, Leica, Firehouse Technologies, Colorado Drone Chargers, and many more.
